Installation Guide

8
8 BEFORE INSTALLATION
IMPORTANT!

Ensure your product is not exposed to any heat generating products eg cooktop, oven or dishwasher.

The product must be installed by a qualified installer, or Fisher & Paykel trained and supported service technician to avoid faulty electrical connection.

All connections for electrical power and grounding must comply with local codes and ordinances and be made bylicensed personnel when required.

Avoid installation of the product/s under a ground fault circuit interrupter (GFCI).

Ensure the product is installed properly. Improperinstallation that results in product failure isnot covered under the product warranty.
Check the installation location
Cabinetry

Check the dimensions of the cabinetry (width, depth, height, floor level, finished alcove returns).

Ensure that the ventilation openings in the cabinetry areclear of obstruction.
Power supply connection

Ensure that there is a separate power outlet for the product.

Avoid sharing the power point with other products to prevent the product from accidentally switching off.

For power requirements, refer to the information onthe serial plate.

Ensure your product is properly grounded (earthed).

Connect your product to an electrical supply with thefitted plug and lead.

We recommend to use an isolating switch that is easily accessible to the user after the product is installed.
Your product

Ensure that your product is the correct model as peryour order.

Ensure that the packaging is not damaged upon delivery.

Check that the components and install kits are complete.