Installation Guide

23
!9 INSTALL TOP DOOR PANEL (CUSTOM)
Height adjustment of the door panel
!7
Turn the height adjustment nuts (N) with a hexkey. Hold the side adjustment nuts (O) with
a spannerwrench to ensure it does not rotate when turning the height adjustment nuts.
– We recommend to use a T-handle hex key so that the height adjustment nuts can be
turned easily without being blocked by the magnet sensor.
– If the height adjustment nuts cannot be adjusted, check the left and right clearances
ofthe top hanging bracket.
Side adjustment of the door panel
!8
Loosen the side adjustment nuts (O) and move the door panel slightly sideways to adjust
the side alignment.
– Hold the height adjustment nuts (N) with the hex key to ensure it does not rotate
when loosening the side adjustment nuts.
Depth adjustment of the door panel
!9
Loosen the depth adjustment nuts (P) and move the door panel forward/backward to
adjust the depth position.
@0
Tighten the nuts fully after you are satisfied with the adjustments.
Adjusting the door panel
Fixing the top door panel
@1
Once you are satisfied with
the adjustment, fully tighten
the screws of the bottom
attachment brackets (Q) to
secure the door panel.
@2
Place the bracket covers
on the bottom attachment
brackets (R).
Hanging the door panel
!3
Open the refrigerator door.
!4
Hang the top door panel onto the height
adjustment nuts (I) at the top of the
refrigerator door.
Bottom view of door
!6
Align the bottom attachment
brackets (K) with the screw
holes at the bottom of the
top door panel. Fasten with
cabinetry attachment screws
(L) and wood screws (M).
– Do not tighten fully to
allow adjustment of the
top door panel.
I
!5
Screw the side adjustment nuts (J) onto
the thread of the height adjustment
nuts to secure the door panel to the
refrigerator door.
– Do not tighten fully to allow
adjustment of the top door panel.
SCALE 2:1
J
SCALE 2:1
J
K
L
M
SCALE 2:1
P
N
O
R
Q