Installation Guide

25
SCALE 2:1
@0 INSTALL BOTTOM DOOR PANEL (CUSTOM)
Installing the hanging and attachment brackets
7 Align the center line of the top hanging
bracket with the center of the top door panel.
8 Once aligned, fix the top hanging bracket to
the bottom door panel with wood screws.
9 Remove the rulers from the top hanging
bracket and discard.
Hanging the door panel
!0
Open the freezer door.
!1
Hang the bottom door panel onto the
height adjustment nuts (D) at the top
of the freezer door.
!2
Screw the side adjustment nuts (E) onto
the thread of the height adjustment nuts to
secure the door panel to the freezer door.
– Do not tighten fully to allow
adjustment of the bottom door panel.
!3
Align the bottom attachment
brackets (F) with the screw
holes at the bottom of the
bottom door panel. Fasten with
cabinetry attachment screws
(G) and wood screws (H).
– Do not tighten fully to
allow adjustment of the
bottom door panel.
Bottom view of door
D
SCALE 2:1
E
F
G
H
C
6 Lay the bottom custom door panel
(face down) onto the floor and place
the top hanging bracket on the door
panel. Latch the rulers on top of the
door panel (C).
E