Installation Guide

26
@0 INSTALL BOTTOM DOOR PANEL (CUSTOM)
Fixing the bottom door panel
!8
Once you are satisfied with
the adjustment, fully tighten
the screws of the bottom
attachment brackets (L) to
secure the door panel.
Adjusting the door panel
K
I
J
Height adjustment of the door panel
!4
Turn the height adjustment nuts (I) with a hexkey. Hold the side adjustment nuts (J) with a
spannerwrench to ensure it does not rotate when turning the height adjustment nuts.
– If the height adjustment nuts cannot be adjusted, check the left and right clearances
ofthe bottom hanging bracket.
Side adjustment of the door panel
!5
Loosen the side adjustment nuts (J) and move the door panel slightly sideways to adjust
the side alignment.
– Hold the height adjustment nuts (I) with the hex key to ensure it does not rotate when
loosening the side adjustment nuts.
Depth adjustment of the door panel
!6
Loosen the depth adjustment nuts (K) and move the door panel forward/backward to
adjust the depth position.
!7
Tighten the nuts fully after you are satisfied with the adjustments.
SCALE 2:1
!9
Place the bracket covers
on the bottom attachment
brackets (M).
M
L