INTEGRATED COOLDRAWER TM MULTI-TEMPERATURE DRAWER RB90S model INSTALLATION GUIDE NZ AU BI EU
CONTENTS Safety and warnings 4 Integrated cooldrawer tm 5 Supplied parts 5 Drawer panels 6 Handle kit 6 Product dimensions 7 Stainless steel panel dimensions 8 Custom panel dimensions — Single panel 9 Custom panel dimensions — Dual panel 10 Cabinetry dimensions — Framed 11 Cabinetry dimensions — Frameless 12 Electrical connection 13 Cabinetry preparation 14 Panel preparation 15 Attach power cord & trim brackets 16 Position product into cabinetry 16 Attach drawer panel 17 S
SAFETY AND WARNINGS ! WARNING! Electric Shock Hazard Failure to follow this advice may result in electrical shock or death. • Read and follow the safety and warnings outlined in this installation guide before operating this appliance. READ AND SAVE THIS GUIDE WARNING! To avoid hazard, follow these instructions carefully before Installing or using this appliance. Please make this information available to the persons installing the appliance. z Assume all electrical parts are live.
INTEGRATED COOLDRAWERTM SUPPLIED PARTS COOLDRAWER™ MULTI-TEMPERATURE DRAWER INTEGRATED COOLDRAWER TM RB36S & RB90S models MULTI-TEMPERATURE DRAWER RB90S model SERVICE & WARRANTY SERVICE ET GARANTIE ΣΈΡΒΙΣ ΚΑΙ ΕΓΓΎΗΣΗ SERVIZIO E GARANZIA SERVICE & GARANTIE HUOLTO JA TAKUU SERVICE OG GARANTI 保修和维修 USER GUIDE 服務和保修 INSTALLATION GUIDE US CA NZ AU BI SG NZ AU BI EU Installation guide Service & Warranty Installation brackets (2x) Installation trim (2x) User guide Power cord (1x) Vent duct (1x)
DRAWER PANELS HANDLE KIT The Stainless steel drawer panel is not supplied and must be purchased separately through an authorised Fisher and Paykel dealer. Visit fisherpaykel.com for more information. The handle kit is not supplied and must be purchased separately through an authorised Fisher & Paykel dealer. Visit fisherpaykel.com for more information.
PRODUCT DIMENSIONS b e f A C FRONT VIEW PROFILE VIEW e PRODUCT DIMENSIONS MM A Overall height of product* 640 B Overall width of product* 855 C Depth of chassis** 557 D Width of internal drawer front 805 E Depth of internal drawer front 45 F Depth of drawer (open) measured from front* 520 * Does not include Stainless steel or custom door panel, false panel and handle. d **Includes power terminal.
STAINLESS STEEL PANEL DIMENSIONS DRAWER PANEL DIMENSIONS c b CONTEMPORARY MM A Height of custom drawer panel 476 B Width of custom drawer panel 908 C Depth of custom drawer panel 19 Weight of drawer panel (including handle) 7kg F A e d FALSE PANEL DIMENSIONS MM D Height of custom false panel 150 - 180 E Width of custom false panel min 896 F Depth of custom false panel 16 - 20 False panel to be manufactured and fitted by cabinetmaker.
CUSTOM PANEL DIMENSIONS — SINGLE PANEL c DRAWER PANEL DIMENSIONS A MM A Height of custom drawer panel min 630 B Width of custom drawer panel min 896 C Depth of custom drawer panel 16 - 20 Maximum weight of drawer (including handle) 7 kg Custom drawer panel to be manufactured and fitted by cabinetmaker. These panels must be adequately sealed to withstand moisture (50°C @ 80% RH).
CUSTOM PANEL DIMENSIONS — DUAL PANEL DRAWER PANEL DIMENSIONS c b MM A Height of custom drawer panel min 476 B Width of custom drawer panel min 896 C Depth of custom drawer panel 16 - 20 Weight of drawer panel (including handle) 7kg f FALSE PANEL DIMENSIONS A e d MM D Height of custom false panel 150 - 180 E Width of custom false panel min 896 F Depth of custom false panel 16 - 20 Custom drawer panel and false panel to be manufactured and fitted by cabinetmaker.
CABINETRY DIMENSIONS — FRAMED A B G C D spacer f DIMENSIONS MM A Overall width of cabinetry frame 914 B Inside width of cabinetry frame min 864 C Inside height from top inner face of cabinetry frame to top of spacer* min 644 D Inside height from top inner face to bottom inner face of cabinetry frame i H E Inside depth from front to rear wall of cabinetry j h k e ISO VIEW min 21 G Width of spacer min 50 H Width of vent duct min 215 I Depth of vent duct min 40 K Clearance between v
CABINETRY DIMENSIONS — FRAMELESS A B DIMENSIONS G D A Overall width of cabinetry frame C spacer f i j h min 864 C Inside height from top inner face of cabinetry frame to top of spacer* min 644 E Inside depth from front to rear wall of cabinetry k e ISO VIEW G Width of spacer min 50 H Width of vent duct min 215 I Depth of vent duct min 40 m ISO VIEW 12 min 280 min 76 L Depth of cutout at front end of internal shelf** min 102 M Width of internal shelf cutout** min 764 N Corner radi
ELECTRICAL CONNECTION Services can be located on either side of the CoolDrawerTM. Disconnect power to surrounding appliances before preparing the cavity.
CABINETRY PREPARATION INSTALL BRACKETS ATTACH VENT DUCTS Locate the brackets to the top of each spacer. 1 1 Locate the vent ducts to the slots in the cabinetry frame. 2 Cut each vent duct to be flush with the top of the spacer. 3 Smooth the sharp edges with a file or similar tool. 4 Secure the vent ducts by fixing with screws. Ensure there is 25mm clearance between the front end of cabinetry frame and front of bracket. 25mm Secure each bracket to the spacer with countersunk screws (3x).
PANEL PREPARATION STAINLESS STEEL PANEL CUSTOM PANEL Refer to the dimensions below for the preparation of the Custom door panel when attaching the attachment hooks. Drill the screw holes using a 6mm drill bit, and counterbore from the rear. top attachment hook min 896mm 18mm 18mm min 710mm 5mm 19mm Locate the top attachment hooks (2x) in correct orientation to the screw holes at the back of drawer panel*, and secure with screws. Tighten the locking screw of each hook to 5mm depth.
ATTACH POWER CORD & TRIM BRACKETS 1 Connect the power plug to the back of the CooldrawerTM and clip the cord in place. POSITION PRODUCT INTO CABINETRY Place the CooldrawerTM in front of the cabinetry and connect the power plug to the power outlet. 1 46mm 2 16 Secure the trim brackets with screws to the side of the CooldrawerTM in the correct orientation. 2 Slide the CooldrawerTM into the cavity. Do not screw in the trim brackets at this stage.
ATTACH DRAWER PANEL 1 Hook the drawer panel onto the drawer front channel. 2 Close the drawer and check vertical clearances. 3 Remove the panel and adjust the top attachment hooks as necesary. 5 Slide the panel to achieve even horizontal clearances. 6 Open the drawer and clamp the panel onto the drawer by tightening the bottom attachment hook. 7 Close the drawer and ensure it is flush with the adjacent cabinetry. If not, the product may have to be pulled back or forward.
SECURE PRODUCT TO CABINETRY Open the drawer and secure the product to the cabinetry by securing the four trim brackets with screws. ATTACH FALSE PANEL Attach the false panel securely as recommended by the cabinet maker. 1 The false panel needs to be removable for servicing. ATTACH SIDE TRIMS TO CABINETRY 4mm Install the side trims to the trim brackets in the correct orientation. 18 Check the top and side clearances. 2 Ensure to check basic operation and complete the final checklist.
FINAL CHECKLIST TO BE COMPLETED BY THE INSTALLER F Has all packaging been removed from the appliance? F Is the appliance securely fastened to the cabinetry? F Does the drawer slide freely and close properly? F Has the outlet duct been installed correctly? F Is the appliance level? F Are the panels securely attached? F Have the panels been properly aligned for correct operation and appearance? Are all clearances even? F Is there clearance between drawer and cabinetry frame? F Has the power
FISHERPAYKEL.COM © Fisher & Paykel Appliances 2021. All rights reserved. The models shown in this guide may not be available in all markets and are subject to change at any time. The product specifications in this guide apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time.
