Installation Guide
Table Of Contents
- Contents
- Safety and warnings
- Integrated cooldrawertm
- Supplied parts
- Drawer panels
- Handle kit
- Product dimensions
- Stainless steel panel dimensions
- Custom panel dimensions — Single panel
- Custom panel dimensions — Dual panel
- Cabinetry dimensions — Framed
- Cabinetry dimensions — Frameless
- Electrical connection
- Cabinetry preparation
- Panel preparation
- Attach power cord & trim brackets
- Position product into cabinetry
- Attach drawer panel
- Secure product to cabinetry
- Attach side trims to cabinetry
- Attach false panel
- Final checklist
12
DIMENSIONS MM
A Overall width of cabinetry frame 900
B Inside width of cabinetry frame min 864
C Inside height from top inner face of cabinetry frame
to top of spacer*
min 644
D Inside height from top inner face to bottom inner face
of cabinetry frame
665 - 764
E Inside depth from front to rear wall of cabinetry min 560
F Height of spacer min 21
G Width of spacer min 50
H Width of vent duct min 215
I Depth of vent duct min 40
J Clearance between vent ducts min 280
K Clearance between vent duct and spacer min 76
L Depth of cutout at front end of internal shelf** min 102
M Width of internal shelf cutout** min 764
N Corner radius of internal shelf cutout Ø 16
* Minimum internal height of cabinetry can be 644mm if vent duct is not used.
** If using internal shelf.
NOTE: The product can also be placed directly on the bottom shelf without the spacer or internal shelf depending on the
height of your cabinetry.
CABINETRY DIMENSIONS — FRAMELESS
spacer
A
B
C
f
G
i
H
j
h
k
e
D
l
n
m
An internal shelf can be
used as an alternative to
the spacers to position
the drawer at the
correct height
ISO VIEW
ISO VIEW