Installation Guide
Table Of Contents
- Contents
- Safety and warnings
- Integrated cooldrawertm
- Supplied parts
- Drawer panels
- Handle kit
- Product dimensions
- Stainless steel panel dimensions
- Custom panel dimensions — Single panel
- Custom panel dimensions — Dual panel
- Cabinetry dimensions — Framed
- Cabinetry dimensions — Frameless
- Electrical connection
- Cabinetry preparation
- Panel preparation
- Attach power cord & trim brackets
- Position product into cabinetry
- Attach drawer panel
- Secure product to cabinetry
- Attach side trims to cabinetry
- Attach false panel
- Final checklist
14
CABINETRY PREPARATION
Locate the brackets to the top of
each spacer.
Ensure there is 25mm clearance
between the front end of
cabinetry frame and front of
bracket.
Secure each bracket to the
spacer with countersunk screws
(3x).
Locate the vent ducts to the slots
in the cabinetry frame.
Cut each vent duct to be flush with
the top of the spacer.
Smooth the sharp edges with a file
or similar tool.
Secure the vent ducts by fixing
with screws.
1
1
2
3
4
2
INSTALL BRACKETS ATTACH VENT DUCTS
25mm
Screws flush
with bracket