Installation Guide
Table Of Contents
- Contents
- Safety and warnings
- Integrated cooldrawertm
- Supplied parts
- Drawer panels
- Handle kit
- Product dimensions
- Stainless steel panel dimensions
- Custom panel dimensions — Single panel
- Custom panel dimensions — Dual panel
- Cabinetry dimensions — Framed
- Cabinetry dimensions — Frameless
- Electrical connection
- Cabinetry preparation
- Panel preparation
- Attach power cord & trim brackets
- Position product into cabinetry
- Attach drawer panel
- Secure product to cabinetry
- Attach side trims to cabinetry
- Attach false panel
- Final checklist
17
Hook the drawer panel onto the
drawer front channel.
Slide the panel to achieve even
horizontal clearances.
Close the drawer and check vertical
clearances.
Open the drawer and clamp the
panel onto the drawer by tightening
the bottom attachment hook.
Remove the panel and adjust the
top attachment hooks as necesary.
Close the drawer and ensure it is
flush with the adjacent cabinetry.
If not, the product may have to be
pulled back or forward.
Replace the panel on the drawer and
confirm vertical clearances.
Ensure there is clearance between
the panel and cabinetry when the
drawer is fully closed.
1
5
2
6
3 7
4
8
ATTACH DRAWER PANEL
1/16" (2mm)