Installation Guide
14
9 DOOR CLEARANCE
90° DOOR OPENING115° DOOR OPENING
[FULL ROTATION]
A
B
C
D
B
C
A
E
Wall
90° DOOR OPENING
90° DOOR OPENING115° DOOR OPENING
[FULL ROTATION]
A
B
C
D
B
C
A
E
Wall
115° DOOR OPENING
(FULL INTERNAL ACCESS)
RS32A72 RS36A72
DIMENSIONS in mm in mm
A
Depth of door (widest opening) measured from front of door 15 9/16" 395 171/2" 445
B
Depth of drawer (open) measured from front of drawer, including handle 15 3/4" 400 153/4" 400
C
Depth of drawer (open) measured from front of drawer, excluding handle 14 3/16" 360 14 3/16" 360
D
Minimum door clearance* to adjacent wall (115° — full internal access) 11" 280 1113/16" 300
E
Minimum door clearance* to adjacent wall (90° — reduced internal access) 3 15/16" 100 313/16" 100
* Measured from front cabinetry edge, includes 2mm cabinetry gap.
Insert hinge limiting pin
WARNING!
●
Before opening the doors, ensure that the appliance is
stable.
●
Follow these steps to avoid risks that can cause serious
injury or death.
For 90° door swing, a hinge limiting pin is supplied with
your appliance. This pin fits in the boreholes of the top
hinge (B).
1
Open door to 90°.
2
Insert the hinge limiting pin vertically into the bore hole.
– Apply a gentle tap to the pin if it does not
slide smoothly.