Installation Guide
36
Internal box
X
Install
fasteners kit
#8 x 16
Mush Washer
Twin Thread
Philips Screw
#8 x 16
Mush Washer
Twin Thread
Philips Screw
#8Gx16 flat head screw
(2)
Tools
Cross-head screwdriver
Powered driver (optional)
Secure the top trim to cabinetry
1 Secure the top trim to the ceiling of the cabinetry
with #8Gx16 flat head screws (A).
Repeat on the opposite side.
2 Lower the feet until it engages the floor to provide
more stability to the appliance and prevent back
and forth movement.
Reattach the hinge end caps
3 Reattach the left hinge end cap (B).
z
Align hinge cap to the appliance, press
andfirmly slide the cap to the right.
z
Hold onto the corner of the end cap,
firmly push up and to the left to engage
securing hook. Ensure cap is flush
with the appliance.
150
C
180
L
O
P
B
150
C
180
L
O
P
C
4
Reattach right hinge end cap (C).
– Align hinge cap to appliance, press
and firmly slide the cap to the left.
– Ensure cap is flush with
the appliance.
IMPORTANT!
Lower the feet until it engages the floor to provide more stability to the
appliance and prevent back and forth movement.
@1 FIXING TO CABINETRY
A