Installation Guide

10
Important notes
z
All ranges come fitted standard with with an Integral Flat Vent Trim.
z
There are three different backguards available for purchase:
z
Range Mount Low Backguard
z
Wall Mount High Backguard with Low Shelf
z
Wall Mount High Backguard with High Shelf, also supplied with an Angled Vent Trim.
z
For installations against non-combustible* surfaces only, you may install the range without a backguard or choose any of the three backguards.
z
For installations close to combustible surfaces (above the cooking surface), without a backguard, there must be a minimum 6" (152mm) clearance.
z
For installations immediately against combustible surfaces (above the cooking surface), you must purchase and fit the Wall Mount High Backguard
High Shelf and Angled Vent Trim.
Backguard model numbers
RANGE
RANGE MOUNT
LOWBACKGUARD
WALL MOUNT HIGH
BACKGUARD LOW SHELF
WALL MOUNT HIGH
BACKGUARD HIGH SHELF
BACKGUARD WIDTH
IN MM
30" models BGRV2-1230 BGRV2-3030 BGRV3-3030H 29 7/8 759
36" models BGRV2-1236 BGRV2-3036 BGRV3-3036H 3 5 7/ 8 911
48" models BGRV2-1248 BGRV2-3048 BGRV3-3048H 47 7/8 1216
Note: For more information on Backguard installation, refer to the separate instructions provided with your backguard.
Backguard Installation Instructions can also be downloaded from our website, www.fisherpaykel.com
INSTALLATION SCENARIOS AND USE OF BACKGUARDS