Planning Guide Dual Fuel Range
DATE: 14.07.2020
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
CLEARANCE DIMENSIONS
0" Professional Range - Induction
INDICATES CLEARANCES ---------------
INDICATES PRODUCT DATUM --------------------
0 100 200 400
millimetres
DATUM : FLOOR
FRONT VIEW PROFILE VIEW
DATUM :
TOP OF COUNTERTOP
CABINET FACE FOR INSTALLATION
WITH PROJECTING CONTROL PANEL
CABINET FACE FOR INSTALLATION
WITH FLUSH CONTROL PANEL
CABINET FACE FOR
INSTALLATION WITH
PROJECTING CONTROL PANEL
CABINET FACE FOR
INSTALLATION WITH
FLUSH CONTROL PANEL
PLAN VIEW
MINIMUM CLEARANCE:
COMBUSTIBLE SURFACE
MAXIMUM OVERALL DEPTH
OF OVERHEAD CABINETRY
MINIMUM CLEARANCE:
ADJACENT OVERHEAD CABINET
MINIMUM CLEARANCE:
NON-COMBUSTIBLE SURFACE
MINIMUM CLEARANCE:
VENTILATION HOOD
MINIMUM CLEARANCE:
NEAREST VERTICAL
COMBUSTIBLE SURFACE
MINIMUM CLEARANCE:
NEAREST VERTICAL
COMBUSTIBLE SURFACE
D
E
D
D
B
CC
Model no:
RIV3-304
Clearance Dimensions
mm
a Minimum width of ventilation hood installed above range
- not shown*
762
B Minimum vertical distance between countertop and cabinet
extending above counter
457
c Minimum clearance from left and right of range to nearest
vertical combustible surface
05
d Minimum clearance from cooking surface to:
- combustible surface centred above the cooking surface
- combustible covering for ventilation hood centred above
the cooking surface
- non-combustible surface** centred above the cooking
surface
172
914
762
e Maximum overall depth of overhead cabinetry
0
*IMPORTANT NOTE: For full installation and clearance details please refer to
our installation manual.
**Non-combustible surfaces: as defined in ‘National Fuel Gas Code’ (ANSI
Z223.1, Current Edition). Clearances from non-combustible materials are not
part of the ANSI Z21.1 scope and are not certified by UL. Clearances of less
than 6" (152mm) must be approved by the local codes and/or by the local
authority having jurisdiction.