Quick Start Guide

9
1 INSTALL TYPE 2 REAR SURFACE
INSTALLATION SCENARIOS AND USE OF BACKGUARDS
WALL
COMBUSTIBLE
ISLAND
NON-COMBUSTIBLE
NO BACKGUARD
CUSTOM* BACKGUARD
*Fabricated from non-combustible materials only
NO BACKGUARD
LOW THIN BACKGUARD
HIGH THIN BACKGUARD
HIGH THICK BACKGUARD
WITH ANGLED TRIM
Non-combustible surfaces: as defined in ‘National Fuel Gas Code’
(ANSI Z223.1, Current Edition). Clearances from non-combustible
materials are not part of the ANSI Z21.1 scope and are not certified
by UL. Clearancesofless than 6" (152mm) must be approved by
the local codes and/or by the local authority having jurisdiction.
MIN 6" (152MM)
CLEARANCE
MAX 1/2" (13MM)
CLEARANCE
MAX 30"
(762MM)
3 BACKGUARD OPTIONS
(puchased separately)
ANGLED TRIM
CUSTOM*
BACKGUARD