User Guide
Table Of Contents
- Fisher & Paykel Professional Range
- Safety and warnings
- Before you begin
- First use
- Using the oven light
- Using the kitchen timer
- Changing the time
- Locking the control panel
- Unlocking the control panel
- Cooking options
- Cooking options | Delayed cook
- Cooking options | Auto off
- Cooking options | Food probe
- Guided cooking
- Cooking guide
- Cooking charts
- Burner use
- Induction use
- Induction use | locking controls
- Induction use | Smartzones
- Induction use | Powerboost
- Induction use | Auto Rapidheat
- Induction use | Heat settings
- User preference settings
- WIFI connection and remote mode
- Sabbath Mode
- Care and cleaning
- Using Self Clean
- Troubleshooting
- Alert codes
- Warranty and service
53
1
Push in and turn control dial
counterclockwise to A. Hold dial at A until
appears in the cooking zone display.
Setting Auto RapidHeat
3
2
When RapidHeat is finished, will
stop flashing and the temperature will
automatically reduce to the selected heat
setting.
To cancel Auto RapidHeat turn the control
dial to a lower heat setting, back to the off
position or to
9.
Turn the control dial to the desired heat
setting. The heat setting and
will alternate
in the display.
This feature lets you rapidly heat food
or liquid then automatically reduce the
temperature to a pre-selected heat
setting.
The amount of time the cooking zone will
rapidly heat for depends on the selected
heat setting.
INDUCTION USE | AUTO RAPIDHEAT
HEAT SETTING APPROXIMATE TIME AT RAPID HEAT
1 40 seconds
2 1 minute
3 2 minutes
4 3 minutes
5 4 minutes
6 7 minutes
7 2 minutes
8 3 minutes