User Guide
Table Of Contents
- Fisher & Paykel Professional Range
- Safety and warnings
- Before you begin
- First use
- Using the oven light
- Using the kitchen timer
- Changing the time
- Locking the control panel
- Unlocking the control panel
- Cooking options
- Cooking options | Delayed cook
- Cooking options | Auto off
- Cooking options | Food probe
- Guided cooking
- Cooking guide
- Cooking charts
- Burner use
- Induction use
- Induction use | locking controls
- Induction use | Smartzones
- Induction use | Powerboost
- Induction use | Auto Rapidheat
- Induction use | Heat settings
- User preference settings
- WIFI connection and remote mode
- Sabbath Mode
- Care and cleaning
- Using Self Clean
- Troubleshooting
- Alert codes
- Warranty and service
71
CARE AND CLEANING
Replacing burner parts
IMPORTANT!
When replacing the burners, ensure the two locating pins on the bottom of the brass
flame spreader are correctly aligned with the locating pin holes on the top of the simmer
ring. Incorrect alignment will produce a potentially dangerous flame and cause poor
burner performance.
Notches
Brass flame
spreader
Locating pin
Locating pin
holes
Simmer ring
Ignitor
Burner cap