3 6" P R O F E SSI O NAL R A N GE S & B AC KG UARDS — RDV3-366 , RIV3-365 BGRV3-1236, BGRV3-3036, BGRV3-3036H models PLANNING GUIDE
CONTENTS 36" Professional Range PAGE RDV3-366, RIV3-365 in mm Key Design Decisions 5 17 Ventilation Requirements 6 281 Product & Cavity Dimensions 7 19 Clearance Dimensions 8 20 Cavity Preparation 9 21 Product & Cavity Dimensions 10 22 Clearance Dimensions 11 23 Cavity Preparation 12 24 36" Professional Range RDV3-366-N, RDV3-366-L 36" Professional Range RIV3-365
CONTENTS (continued) 36" Professional Range Backguard BGRV2-1236 PAGE in mm Product Dimensions 13 25 14 26 15 27 36" Professional Range Backguard BGRV2-3036 Product Dimensions 36" Professional Range Backguard BGRV3-3036H Product Dimensions
IMPERIAL
KEY DESIGN DECISIONS 36" Professional Range 1 2 3 INSTALL TYPE REAR SURFACE BACKGUARD OPTIONS Model no: RDV3-366, RIV3-365 BGRV3-3036H ANGLED TRIM (Supplied with backguard) BGRV2-1236 MIN 6" CLEARANCE WALL COMBUSTIBLE NO BACKGUARD LOW THIN BACKGUARD HIGH THICK BACKGUARD WITH ANGLED TRIM BGRV2-3036 CUSTOM BACKGUARD* MIN 30" MAX 1/2" NON COMBUSTIBLE CUSTOM FABRICATED* BACKGUARD ISLAND HIGH THIN BACKGUARD *Fabricated from non combustible materials only NO BACKGUARD DATE: 17.07.
VENTILATION REQUIREMENTS 36" Professional Range 1 2 INSTALL TYPE HOOD SURROUND MATERIAL Model no: RDV3-366, RIV3-365 Specifications Ventilation Unit MIN 19" MIN 19" Hood Blower Ventilation Unit Hood Blower MIN 30" MAX 42"* MIN 36" Wall Installation Minimum 19'' Deep x Unit Width Minimum 550 CFM Island Installation Minimum 19'' Deep x Unit Width Minimum 550 CFM Note: A suitable hood must be installed above the range.
PRODUCT & CAVITY DIMENSIONS 36" Professional Range - Dual Fuel B 35 7/8" Model no: RDV3-366 H Product Dimensions a Height of range (from floor to cooktop, excluding grates and rear trim) c 29 1/8" B Overall width of range CABINET FACE FOR INSTALLATION WITH PROJECTING CONTROL PANEL 29 1/8" d Depth from rear of chassis to cabinetry face - projecting 25 3/8" f Height from countertop to top of pan supports p u PLAN VIEW s t 1 3/4" 2 7/8" i Height from countertop to bottom of control panel 7 3/
CLEARANCE DIMENSIONS 36" Professional Range - Dual Fuel C MINIMUM CLEARANCE: NEAREST VERTICAL COMBUSTIBLE SURFACE C F Model no: MINIMUM CLEARANCE: NEAREST VERTICAL COMBUSTIBLE SURFACE RDV3-366 D MINIMUM CLEARANCE: COMBUSTIBLE SURFACE in Clearance Dimensions CABINET FACE FOR INSTALLATION WITH PROJECTING CONTROL PANEL CABINET FACE FOR INSTALLATION WITH FLUSH CONTROL PANEL a Minimum width of ventilation hood installed above range - not shown* 36'' B Minimum vertical distance between countertop a
CAVITY PREPARATION 36" Professional Range - Dual Fuel Model no: RDV3-366 Specifications Oven Total Capacity 4.8 cu.ft Electrical Supply 120/240 VAC, 60Hz Service 30 amp circuit Max Current Draw LEFT SIDE OF CAVITY Receptacle 29 A 4-prong grounding type [NEMA 14-50P plug] Gas Connection 1 1/2" Natural Gas 6" to 9" W.C. LP Propane 11" to 14" W.C. Types FINAL POSITION OF RANGE AGAINST WALL REGULATOR* 1 1/2" 1/2” NPT Minimum 5/8” dia.
PRODUCT & CAVITY DIMENSIONS 36" Professional Range - Induction B 35 7/8" Model no: RIV3-365 G Product Dimensions c 29 1/8" a Height of range (from floor to cooktop, excluding grates and rear trim) B Overall width of range CABINET FACE FOR INSTALLATION WITH PROJECTING CONTROL PANEL t o 29 1/8" d Depth from rear of chassis to cabinetry face - projecting 25 3/8" 1 3/4" g Depth of rear trim 2 7/8" h Height from countertop to bottom of control panel 7 3/4" j Height from countertop to centre of h
CLEARANCE DIMENSIONS 36" Professional Range - Induction C MINIMUM CLEARANCE: NEAREST VERTICAL COMBUSTIBLE SURFACE C Model no: MINIMUM CLEARANCE: NEAREST VERTICAL COMBUSTIBLE SURFACE RIV3-365 D MINIMUM CLEARANCE: COMBUSTIBLE SURFACE in Clearance Dimensions CABINET FACE FOR INSTALLATION WITH PROJECTING CONTROL PANEL CABINET FACE FOR INSTALLATION WITH FLUSH CONTROL PANEL a Minimum width of ventilation hood installed above range - not shown* 36'' B Minimum vertical distance between countertop and
CAVITY PREPARATION 36" Professional Range - Induction Model no: RIV3-365 Specifications Oven Total Capacity 4.8 cu.ft Electrical Supply 120/240 VAC, 60Hz Service 50 amp circuit Max Current Draw LEFT SIDE OF CAVITY Receptacle IMPORTANT NOTE: For full installation and connection details please refer to our installation manual.
PRODUCT DIMENSIONS 36" Professional Range Backguard NOT TO SCALE BGRV2-1236 Model no: BGRV2-1236 Product Dimensions A Height of backguard above vent trim on range c 35 7/8'' B Overall height of backguard C Overall width of backguard D Overall depth of backguard DATUM : BACK OF PRODUCT in 10 3/8'' 15 15/16'' 35 7/8'' 1/2'' E Height of backguard below vent trim on range 5 9/16'' F Depth of backguard below vent trim on range 1/16'' PLAN VIEW RDV3-366 (illustrated) DATUM : BACK OF PRODUCT c 35 7/8''
c 35 7/8" NOT TO SCALE PRODUCT DIMENSIONS 36" Professional Range Backguard BGRV2-3036 Model no: DATUM : BACK OF PRODUCT BGRV2-3036 Product Dimensions d f A Height of backguard above vent trim on range B Overall height of backguard 29 1/8" C Overall width of backguard 35 7/8" D Overall depth of backguard and racks 9 5/16" E Depth of backguard F Depth of racks G Width of racks g RDV3-366 (illustrated) DATUM : BACK OF PRODUCT I Distance from bottom of backguard to bottom of racks c 35 7/8"
PRODUCT DIMENSIONS 36" Professional Range Backguard with Angled Vent Trim B 35 7/8" NOT TO SCALE BGRV3-3036H Model no: DATUM : BACK OF BACKGUARD BGRV3-3036H f Product Dimensions c h PLAN VIEW DATUM : BACK OF BACKGUARD 5/16" g g 11 5/16" in 30'' B Overall width of backguard 35 7/8'' C Overall depth of backguard and racks 10 3/8'' D Height of backguard 26 1/2'' E Height of angled vent trim 3 1/2'' F Depth of angled vent trim 2 7/8'' G Depth of backguard i RDV3-366 (illustrated) A Overa
METRIC
KEY DESIGN DECISIONS 36" Professional Range 1 2 3 INSTALL TYPE REAR SURFACE BACKGUARD OPTIONS Model no: RDV3-366, RIV3-365 BGRV3-3036H ANGLED TRIM (Supplied with backguard) BGRV2-1236 MIN 152mm CLEARANCE WALL COMBUSTIBLE NO BACKGUARD LOW THIN BACKGUARD HIGH THICK BACKGUARD WITH ANGLED TRIM BGRV2-3036 CUSTOM BACKGUARD* MIN 762mm MAX 13mm NON COMBUSTIBLE CUSTOM FABRICATED* BACKGUARD ISLAND HIGH THIN BACKGUARD *Fabricated from non combustible materials only NO BACKGUARD DATE: 17.07.
VENTILATION REQUIREMENTS 36" Professional Range 1 2 INSTALL TYPE HOOD SURROUND MATERIAL Model no: RDV3-366, RIV3-365 Specifications Ventilation Unit MIN 480mm MIN 480mm Hood Blower Ventilation Unit Hood MIN 762mm MAX 1067mm* Blower Wall Installation Minimum 480mm Deep x Unit Width Minimum 550 CFM Island Installation Minimum 480mm Deep x Unit Width Minimum 550 CFM MIN 914mm Note: A suitable hood must be installed above the range.
PRODUCT & CAVITY DIMENSIONS 36" Professional Range - Dual Fuel B 911 Model no: RDV3-366 H Product Dimensions a Height of range (from floor to cooktop, excluding grates and rear trim) c 740 mm min 908 max 933 B Overall width of range CABINET FACE FOR INSTALLATION WITH PROJECTING CONTROL PANEL CABINET FACE FOR INSTALLATION WITH FLUSH CONTROL PANEL u 740 d Depth from rear of chassis to cabinetry face - projecting 644 e Depth from rear of chassis to cabinetry face - flush 703 f Height from counte
CLEARANCE DIMENSIONS 36" Professional Range - Dual Fuel C MINIMUM CLEARANCE: NEAREST VERTICAL COMBUSTIBLE SURFACE C F Model no: MINIMUM CLEARANCE: NEAREST VERTICAL COMBUSTIBLE SURFACE RDV3-366 D CABINET FACE FOR INSTALLATION WITH PROJECTING CONTROL PANEL CABINET FACE FOR INSTALLATION WITH FLUSH CONTROL PANEL MINIMUM CLEARANCE: COMBUSTIBLE SURFACE Clearance Dimensions mm a Minimum width of ventilation hood installed above range - not shown* 914 B Minimum vertical distance between countertop an
CAVITY PREPARATION 36" Professional Range - Dual Fuel Model no: RDV3-366 Specifications Oven Total Capacity 136L Electrical Supply 120/240 VAC, 60Hz Service 30 amp circuit Max Current Draw LEFT SIDE OF CAVITY Receptacle 29 A 4-prong grounding type [NEMA 14-50P plug] Gas Connection 38mm Natural Gas 6" to 9" W.C. LP Propane 11" to 14" W.C. Types FINAL POSITION OF RANGE AGAINST WALL REGULATOR* 38mm 1/2” NPT Minimum 5/8” dia. flex line *Regulator location may vary depending on model.
PRODUCT & CAVITY DIMENSIONS 36" Professional Range - Induction B 911 Model no: RIV3-365 g Product Dimensions c 740 a Height of range (from floor to cooktop, excluding grates and rear trim) mm min 908 max 933 B Overall width of range CABINET FACE FOR INSTALLATION WITH PROJECTING CONTROL PANEL CABINET FACE FOR INSTALLATION WITH FLUSH CONTROL PANEL 740 d Depth from rear of chassis to cabinetry face - projecting 644 e Depth from rear of chassis to cabinetry face - flush 703 f Height of rear trim
CLEARANCE DIMENSIONS 36" Professional Range - Induction C MINIMUM CLEARANCE: NEAREST VERTICAL COMBUSTIBLE SURFACE C Model no: MINIMUM CLEARANCE: NEAREST VERTICAL COMBUSTIBLE SURFACE RIV3-365 D CABINET FACE FOR INSTALLATION WITH PROJECTING CONTROL PANEL CABINET FACE FOR INSTALLATION WITH FLUSH CONTROL PANEL MINIMUM CLEARANCE: COMBUSTIBLE SURFACE Clearance Dimensions mm a Minimum width of ventilation hood installed above range - not shown* 914 B Minimum vertical distance between countertop and
CAVITY PREPARATION 36" Professional Range - Induction Model no: RIV3-365 Specifications Oven Total Capacity 136L Electrical Supply 120/240 VAC, 60Hz Service 50 amp circuit Max Current Draw LEFT SIDE OF CAVITY Receptacle IMPORTANT NOTE: For full installation and connection details please refer to our installation manual.
PRODUCT DIMENSIONS 36" Professional Range Backguard NOT TO SCALE BGRV2-1236 Model no: BGRV2-1236 Product Dimensions c 911 263 B Overall height of backguard 405 C Overall width of backguard D Overall depth of backguard DATUM : BACK OF PRODUCT mm A Height of backguard above vent trim on range 911 13 E Height of backguard below vent trim on range 142 F Depth of backguard below vent trim on range 1 PLAN VIEW RDV3-366 (illustrated) DATUM : BACK OF PRODUCT d 13 c 911 A 263 b DATUM : TOP OF VEN
NOT TO SCALE PRODUCT DIMENSIONS 36" Professional Range Backguard c 912 BGRV2-3036 DATUM : BACK OF PRODUCT Model no: BGRV2-3036 Product Dimensions d f 720 B Overall height of backguard 740 C Overall width of backguard D Overall depth of backguard and racks E Depth of backguard g RDV2-366 (illustrated) PLAN VIEW e c 912 mm A Height of backguard above vent trim on range 911 237 13 F Depth of racks 224 G Width of racks 864 H Distance from top of backguard to bottom of racks 278 I Distan
PRODUCT DIMENSIONS 36" Professional Range Backguard with Angled Vent Trim B 912 NOT TO SCALE BGRV2-3036H Model no: DATUM : BACK OF BACKGUARD BGRV3-3036H f c h Product Dimensions mm A Overall height of backguard with angled vent trim 763 B Overall width of backguard 264 D Height of backguard 673 E Height of angled vent trim i PLAN VIEW RDV3-366 (illustrated) 90 F Depth of angled vent trim 72 G Depth of backguard 33 H Depth of racks 230 I Width of racks 862 J Distance from top of b
IMPORTANT: The product dimensions and specifications apply at the date of issue. Under our policy of continuous product improvement, these dimensions and specifications may change at any time. Dimensions may vary by ±2mm (1/16"). Please read the installation guide for detailed information on installing the product or visit fisherpaykel.com.
