Planning Guide

DATE: 17.07.2020
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
PRODUCT & CAVITY DIMENSIONS
6" Professional Range - Induction
INDICATES CAVITY CLEARANCES ---------------
INDICATES PRODUCT DATUM --------------------
35 7/8"
B
29 1/8"
5 /4" -
6 /4"
Model no:
RIV3-365
Product Dimensions
in
a Height of range (from floor to cooktop, excluding grates and
rear trim)
min 5 /4"
max 6 /4"
B Overall width of range
5 7/8"
c Overall depth of range (excluding handle and dials)
29 1/8"
d Depth from rear of chassis to cabinetry face - projecting
25 /8"
e Depth from rear of chassis to cabinetry face - flush
27 11/16"
f Height of rear trim
1 /4"
g Depth of rear trim
2 7/8"
h Height from countertop to bottom of control panel
7 /4"
i Height from countertop to top of door
8 1/8"
j Height from countertop to centre of handle
9 7/16"
k Height from countertop to bottom of door
29"
l Height from countertop to top of lower panel
29 15/16"
m Height from countertop to bottom of lower panel
 5/8"
n Thickness of handle (not including standoffs)
1 1/4"
o Width of handle (including standoffs)
5 1/8"
p Depth of handle (measured from front of door)
2 7/8"
q Depth of front of cooktop to control panel
1 7/16"
r Height of cooktop front face
1 /8"
s Height from top of cooktop to control panel
2"
t Depth of open door to cabinetry face - flush
19 1/8"
u Adjustable feet height
min 1/2"
max 1 1/2"
Cavity Dimensions
mm
Overall width of cavity
min 6"
Overall depth of cavity for projecting control panel
max 25 /8"
Overall depth of cavity for flush control panel
max 27 11/16"
Overall height of cavity
5 /4"
6 /4"
IMPORTANT NOTE: For full installation and clearance details please refer to
our installation manual.
29 1/8"
35 7/8"
B
0 5 10 20
inches
f
o
m
FRONT VIEW
PLAN VIEW
PROFILE VIEW
k
c
n
i
t
A
hj
p
D
e
q
l
s
G
r
t
DATUM : FLOOR
DATUM :
TOP OF
COUNTERTOP
CABINET FACE FOR INSTALLATION
WITH PROJECTING CONTROL PANEL
CABINET FACE FOR INSTALLATION
WITH FLUSH CONTROL PANEL
CABINET FACE FOR
INSTALLATION WITH
PROJECTING CONTROL PANEL
CABINET FACE FOR
INSTALLATION WITH
FLUSH CONTROL PANEL
c
u