Install Guide - Water Filter Replacement
5
1
Remove the plastic wrapping from
the new filter.
2
Pull the filter head towards you (A).
E
5
Push the entire filter back into the bracket (E).
IMPORTANT!
After installation, the water filter MUST be flushed.
Refer to ‘Flushing the water filter’ for details.
3 FOR REFRIGERATORS WITH EXTERNAL FILTER
4
Push the filter firmly all the way into the filter
head then rotate the filter clockwise 90°
until it locks into place (D).
– If the filter will not turn, ensure the
filter is correctly aligned (B), to allow
the filter to be pushed firmly into the
filter head.
– Ensure the filter is fully rotated 90°
toallow the water to flow.
Installing the new filter
Note: It is not necessary to turn the water supply off when installing the water filter.
A
C
3
Align the filter correctly (B).
Insertthefilter into the filter head (C).
B
D