installation guide

7
MOUNTING OVEN TO THE WALL
Two people are recommended to attach the Microwave Oven/Hood to the Mounting Plate.
1. Thread the power supply cord through the hole
made in the bottom of the top cabinet.
2. Hang the oven on the lower edge of the
mounting plate. Rotate the unit upward.
See Figure 20. Take care that the power
cord is able to clear the edge of the hole
as
theovenisrotatedupward.(Inthecase
of a non-recessed bottom in the top
cabinet, the hole for the cord may need
to be enlarged.)
3. Tighten the two unit mounting screws
located in the grease filter openings.
See
Figure 21.
4. Install grease filters by fitting into the
opening. Push back and up into place.
See
Figure 22.
5. UsethetwoTopCabinetScrews(D)and
twoFlat
Washers(E),suppliedinthe
INSTALLATION HARDWARE, to attach the
unit to the top cabinet. See Figure 23.
6. Make a bundle of the power supply cord
and place it inside the cabinet.
Figure 21
Figure 23
Figure 22
Unit mounting screw
Grommet(formetal
cabinetonly)
(D)
(E)
Grease lter
Figure 20