Use and Care Guide

15
INSTALLATION INSTRUCTIONS
7
Attach the wall mounting bracket with the
two screws provided, attach the bottom
screw first then the top screw (refer to
Diagram5).
8
Insert the filter water into the filter head.
Push the filter firmly into the filter head and
turn in a clockwise direction until it locks
into place (refer to Diagram 6).
9
To flush the water filter of any trapped air,
harmless carbon fines and check for leaks:
Aim the end of the outlet tubing into a
bucket, turn on the faucet and run at least
1gal (4L) of water through. Once complete,
turn the faucet off.
Note: Further flushing is required before
first use of your ice or water functions,
please refer to ‘Before you start using the
Ice & Water or Automatic Ice function’
fordetails.
!0
Run the 1/4” (6mm) tubing to the back of the refrigerator ensuring there is enough
tubing to pull the refrigerator out for service.
!1
Using the measurement guide shown in Diagram 7, mark out 5/8” (16mm), on the end of
the tubing as shown in Diagram 8.
!2
Insert the outlet tubing to the water (solenoid) valve up to the marked line. The outlet tube
can be identified by the upward arrow on the filter head and a blue mark on the tube.
IMPORTANT!
Ensure the outlet tubing is correctly connected to the refrigerator water valve. Refer
to Diagram 3.
!3
Pull gently on tubing to ensure it is locked in as shown in Diagram 10.
!4
Turn the faucet on and check that all connections are dry and free of drips.
!5
Coil water line tubing behind the refrigerator. Pushyour refrigerator into place being
careful notto kink or squash the water line tube.
!6
Read pages 16–17 carefully and then turn refrigeratoron.
Diagram 7
Diagram 9
Diagram 10Diagram 8
Completed installation
Diagram 5
¾” OD x 3/16” ID
Flat Washer
#10-32
Pan Head
Pozi Drive
Wall Plug
#8 x 3/4”
Truss Head
Philips Drive
Self Tapping Screw
¼-20 x ½”
Pan Head
Philips Drive
Machine Screw
M4 x8
Pan Head
Torx Drive
Machine Screw
#10x 3”
Countersunk
Pozidrive
Self tapping Screw
FP Pro Hood Fasteners
¾” OD x 3/16” ID
Flat Washer
#10-32
Pan Head
Pozi Drive
Wall Plug
#8 x 3/4”
Truss Head
Philips Drive
Self Tapping Screw
¼-20 x ½”
Pan Head
Philips Drive
Machine Screw
M4 x8
Pan Head
Torx Drive
Machine Screw
#10x 3”
Countersunk
Pozidrive
Self tapping Screw
FP Pro Hood Fasteners
Diagram 6