User Guide
Table Of Contents
- Model numbers
- Introduction
- Safety and warnings
- Installation instructions
- Moving or storing your appliance
- ActiveSmart™ operating instructions
- ActiveSmart™ special features
- Activesmart™ cleaning care instructions
- ActiveSmart™ user warnings and sounds
- Vertical Refrigerator operating instructions
- Vertical Refrigerator special features and maintenance
- Vertical freezer operating instructions
- Storing food in your refrigerator
- Troubleshooting
- Service & Warranty
18
ACTIVESMART™ SPECIAL FEATURES
Vegetable bin divider instructions (where fitted)
To fit the divider, insert divider into bin on an angle, straighten and slot into place.
Toadjust the divider, fully extend the bin, partially lift the divider, slide sideways
andre-slot into position.
Vegetable bin divider
Bottle holder (where fitted)
The bottle holders can be used to store a variety of bottles.
To position the bottle holder in your refrigerator, simply slot the back edge of the
bottleholder onto the back trim of any shelf in the fresh food compartment.
If you are not using all or some of the bottle holders, the unused bottle holders can be
stacked up on top of one another so they do not take up unnecessary shelf space.
Bottles are best stored with the neck of the beverage facing the front of the refrigerator.
Glass shelves
Glass shelves can be repositioned in the cabinet as desired.
Remove shelves by lifting up the back of the shelf and then pulling the shelf forward.