User Guide

21
ACTIVESMART™ CLEANING CARE INSTRUCTIONS
Humidity Control System (where fitted)
IMPORTANT!
When cleaning the shelf above the vegetable
bins, we recommend that you do not
disassemble the Humidity Control System
from the shelf.
In the event that the humidity control lid
(plastic lid) and humidity slides become
separated from the glass shelf, follow
theseinstructions to reassemble.
1
Turn shelf upside down.
2
To attach humidity slides onto
shelf front corners, fit bottom
clips into shelf front trim.
Next,slide sideways towards
shelfuntil arm clips onto glass.
3
To attach humidity control lid —
with text facing you, align lid with
front of shelf. Holdlid vertically
and fit front end into retainer
onshelf. Ensurelid fits into
retainer as well as underneath
humidity slides.
4
At the sides of the shelf, adjust
humidity slide tabs so thatthe
plastic lid is between theshelf
and the tabs.
5
If clips on back of shelf are
present, fasten lid with rear clips.
Ensure that the cover is fully
secure at front and back of shelf.
Humidity Slides
Retainer
Humidity Control System cleaning