User Guide

26
VERTICAL FREEZER OPERATING INSTRUCTIONS
Models: 635mm wide RF308, RF388, E388
Temperature control
The cabinet control is located at the bottom
rear of the cabinet.
The control has been factory set to position
4’ for normal operating conditions.
The freezer temperature should be
approximately -18°C.
Re-adjust the control as necessary
tosuit yourindividualpreference.
1 is the warmest setting.
7 is the coldest setting.
Door alarms
If the door is left open the alarm will beep after 60seconds.
If the door remains open, subsequent beeps will sound every 30seconds for 5minutes.
A continuous alarm will sound if the door has been left open for 5minutes or longer.
The alarm will stop when the door is closed.
Fault alarms
If the electronic controller detects a fault from which it is unable to recover,
an alarm willsound when the door is opened.
When the door is opened and a fault has occurred, a specific number of beeps
willsound.
If a fault occurs, call your Fisher & Paykel trained and supported service technician
immediately; the number of beeps will help the service person find and remedy
thecause of failure.