Installation and Operation Guide

28
VERTICAL FREEZER OPERATING INSTRUCTIONS
Models: 635mm wide E308, E388
Temperature control

The cabinet control is located at the bottom
rear of the cabinet.

The control has been factory set to position
“4” for normal operating conditions.

The freezer temperature should be
approximately -18°C.

Re-adjust the control as necessary to suit
your individualpreference.
1 is the warmest setting.
7 is the coldest setting.
Door alarms

If the door is left open the alarm will beep
after 60seconds.

If the door remains open, subsequent beeps will sound every 30seconds for 5minutes.

A continuous alarm will sound if the door has been left open for 5minutes or longer.

The alarm will stop when the door is closed.
Fault alarms

If the electronic controller detects a fault from which it is unable to recover, an alarm will
sound when the door is opened.

When the door is opened and a fault has occurred, a specific number of beeps will
sound. If a fault occurs, call your Fisher & Paykel trained and supported service
technician immediately; the number of beeps will help the service person find and
remedy the cause of failure.