Installation Guide

9
1 Using two people, tilt the product back and remove the levelling foot circular
baseinsertfrom the front levelling feet, a small flat blade screw driver can be used
toleverand ‘pop out’ the central circular insert.
2 Lift the product into the cabinet.
3 Lift the front edge of the product and slide the integration foot under the levelling foot.
4 Push the product back to allow the outer cabinet door to close.
This will be approximately 95mm (3 3/4”) from the front edge of the built in cabinet
tothegasket face of the refrigerator.
9FOOT LEVELLING
95mm
(3 3/4”)
to Gasket face
Sample two-door fridge