Installation Guide
6
6REMOVE REFRIGERATION HANDLES
Remove the door handles
After removing the door handles fit the small plugs (supplied) into the visible screw holes.
Attach the spacers with the screws supplied to the side of the built-in cabinet on the side without hinges.
Position approximately 100mm (4”) from the top front, 150mm (6”) from the front edge, and 75mm (3”)
rearcorners of the refrigerator cabinet.
These spacers along with the foot integration bracket maintain an even gap of 20mm (3/4”) between
thecupboard and the refrigerator side.
IMPORTANT!
Take care not to scratch the appliance doors with the Allen key.
1 Remove small screw from underneath the handle using a 2.75mm (1/8”) Allen key.
2 Once screws have been removed, the protuding links that attached the handle can be removed from thedoor.
Double flat doors—designer handles
1 Remove the grub screw from the underneath the handles using
a4mm(3/16”) Allen key.
2 Remove the handles.
3 Remove the links (bosses) that attach the handle to fridge.
2.75mm (1/8”)
Allen key
4mm (3/16”)
Allen key
Remove door
handles by
undoing the
screws as
indicated here