Installation Guide
Table Of Contents
- Installation Guide
- Safety and warnings
- ActiveSmart™ Refrigerator
- Supplied parts
- Handle kit
- Product dimensions
- Cabinetry dimensions — Proud
- Cabinetry dimensions — Flush
- Unpacking and moving your appliance
- Before installation
- Electrical connection
- Water connection (Ice & Water models)
- Flushing the water filter (Ice & Water models)
- Positioning your refrigerator
- Complete installation
14
Before placing food in the fresh food or freezer compartments
z
Remove all internal packaging. Ensure that all transit clips are removed from the refrigerator.
These are small rubber stoppers located at the back of the shelves.
z
Clean the inside of the appliance with a mix of warm water and a small amount of liquid
detergent. Use a soft cloth to remove dust collected during manufacture and transport.
z
Allow the refrigerator and freezer to run empty for 2 – 3 hours to allow each compartment
to cool to the appropriate temperature.
z
The appliance may have an odour on its initial operation, this will go when the refrigerator
and freezer have cooled sufficiently.
COMPLETE INSTALLATION FINAL CHECKLIST
TO BE COMPLETED BY THE INSTALLER
Ensure that:
Check all parts are installed.
Ensure the appliance is level.
Ensure all internal and external packaging is removed from the appliance before use.
Ensure the water filter is installed and has been flushed.
Complete and keep for safe reference:
Model
Serial No.
Purchase Date
Purchaser
Dealer Address
Installer’s Name
Installer’s Signature
Installation Company
Installation Date