ACTIVESMART™ REFRIGERATOR CONTEMPORARY QUAD DOOR FRIDGE FREEZER ICE & WATER RF605QDU, RF605QN, RF605QZ QUAD DOOR FRIDGE FREEZER NON-ICE & WATER RF605QD USER GUIDE NZ AU UK IE SG
CONTENTS Safety and warnings 5 Before you begin 9 Using the control panel (RF605QD models) Main compartment Variable temperature zone 10 10 11 Using the control panel (RF605QN & RF605QZ models) 12 Using your appliance (all models) 13 Temperature control 13 Door alarms 14 Alarm mute 14 Key mute 14 Key lock 15 Sabbath mode 15 Using your water dispenser 16 Water filter 17 Using your appliance (RF605QD models) 20 Variable temperature zone 20 Features 22 Using your appliance (RF60
SAFETY AND WARNINGS WARNING! Electric Shock Hazard Failure to follow this advise may result in death, electric shock, fire or injury to persons. • Read and follow the safety and warnings outlined in this user guide before operating this appliance. WARNING! Risk of fire/flammable material This refrigerator contains flammable refrigerant isobutane (R600a). READ AND SAVE THIS GUIDE Use this appliance only for the intended purpose as described in this user guide.
SAFETY AND WARNINGS Electrical z z z z z z z z z z This appliance must be installed in accordance with the installation instructions before use. To allow disconnection of the appliance from the supply after installation, incorporate a switch in the fixed wiring in accordance with the wiring rules. Never unplug your refrigerator by pulling on the power cord. Always grip the plug firmly and pull straight out from the outlet.
SAFETY AND WARNINGS z Your Fisher & Paykel trained and supported service technician will be able to give advice on environmentally friendly methods of disposing of your old refrigerator or freezer. Food Safety z z z z z Regularly clean surfaces that come into contact with food. Ensure any raw meat or fish is stored in sealed containers to prevent cross-contamination. Immediately clean any drips or spills on surfaces.
SAFETY AND WARNINGS z To reduce the risk associated with choking: DO NOT allow children under 3 years of age to have access to small parts during the installation of the water filter. If using the automatic icemaker after an extended period of no use, or if the ice has developed an unpleasant taste of odour, dispose of ice in the storage container.
BEFORE YOU BEGIN z z z Ensure the installer has completed the final checklist in the installation guide. Read this guide, taking special note of the safety and warnings section. Remove all packaging and dispose of it responsibly. Recycle items that you can.
USING THE CONTROL PANEL (RF605QD MODELS) Main compartment 1 2 3 4 5 6 Illuminates to indicate that the keys on the control panel are locked. When the door is closed the display is automatically locked. 1 Illuminates when the water filter needs replacing. IIluminates to indicate that Sabbath mode is activated. Illuminates to indicate key press sounds are deactivated. 2 Compartment activates control panel when pressed. Allows you to select the compartment to adjust the temperature.
USING THE CONTROL PANEL (RF605QD MODELS) Variable temperature zone 1 2 3 4 5 6 7 1 FOOD MODE Enables you to change the setting of the Variable Temperature Zone — FREEZER, SOFT FREEZE, CHILL, FRIDGE. 2 KEYLOCK Illuminates to indicate that the keys on the control panel are locked. When the door is closed the display is automatically locked. 3 FREEZER MODE For general frozen food items that require storage between 1 – 12 months.
USING THE CONTROL PANEL (RF605QN & RF605QZ MODELS) 1 2 3 4 5 6 7 8 Illuminates to indicate that the keys on the control panel are locked. When the door is closed the display is automatically locked. 1 Illuminates when the water filter needs replacing. IIluminates to indicate that Sabbath mode is activated. Illuminates to indicate key press sounds are deactivated. 2 Fridge/Freezer activates control panel when pressed. Allows you to select the fridge or freezer compartment to adjust the temperature.
USING YOUR APPLIANCE (ALL MODELS) The images in this section are for reference only, your models control panel may differ slightly. Temperature control When you turn your refrigerator on for the first time, the cooling system will automatically cool all compartments to their set temperatures within 2-3 hours. The internal control panel enables you to change and control the temperature of all compartments accurately and independently.
USING YOUR APPLIANCE (ALL MODELS) How to adjust the temperature — Frozen food compartment Press twice to adjust the frozen food compartment temperature. 1 The frozen food compartment light will illuminate. Press press 2 to increase the temperature, to decrease the temperature. Door alarms If the fresh food compartment door is left open, the alarm will beep after 90 seconds, if the freezer door is left open the alarm will beep after 60 seconds.
USING YOUR APPLIANCE (ALL MODELS) Key lock KEY LOCK allows you to disable the buttons on the internal control panel. This is useful when cleaning your refrigerator. To activate/deactivate KEY LOCK, press together for four seconds. 1 and When KEY LOCK is activated the icon on the internal control panel will illuminate. Pressing any of the buttons will sound several beeps to tell you that they are disabled. Sabbath mode In SABBATH MODE, alarms, lights and displays are deactivated for 80 hours.
USING YOUR APPLIANCE (ALL MODELS) Water-dispensing models only 3 2 1 1 Dispenser lock button and LED light Locks/unlocks the water dispenser. The LED above the lock button will illuminate when dispenser is locked. 2 Bottle Chill indicator Icon will illuminate when BOTTLE CHILL is activated and flashes when the beverage is ready. 3 Filter change indicator Icon will illuminate when water filter requires changing.
USING YOUR APPLIANCE (ALL MODELS) Dispenser lock The DISPENSER LOCK is located on the external display and can be activated to prevent water from being dispensed. This is useful when you are cleaning the external display or when there are small children around. To activate/deactivate DISPENSER LOCK, press for four seconds. 1 When activated the light above the button will illuminate. When the dispenser pad is pressed, several beeps will sound to alert the user that water cannot be dispensed.
USING YOUR APPLIANCE (ALL MODELS) Manual ice system (where present) Ice tray An ice storage bin which sits inside the top freezer bin provides storage for and gives you access to clean, clear ice cubes. Attached to the ice storage bin is the ice scoop which provides hygienic access to ice. Ice scoop To make ice 1 Take the ice tray from the top of the ice storage bin. Fill the tray with water. Carefully position the tray back onto the ice storage bin.
USING YOUR APPLIANCE (ALL MODELS) Bottle holder Bottle holders can be used to store a variety of bottles. Unused bottle holders can be stacked up on top of one another so they do not take up unnecessary shelf space. Bottles are best stored with the neck of the beverage facing the front of the refrigerator. 1 To position the bottle holder in your refrigerator, slot the back edge of the bottle holder onto the back trim of any shelf in the fresh food compartment.
USING YOUR APPLIANCE (RF605QD MODELS) Variable temperature zone Changing the Food Mode 1 Unlock the Variable Temperature Zone display by pressing and together for four seconds. Change the mode by pressing . FOOD MODE scrolls from left to right (coldest setting to warmest setting). 2 The FOOD MODE selected will illuminate. The Variable Temperature Zone display will automatically lock after 10 seconds or once the compartment is closed.
USING YOUR APPLIANCE (RF605QD MODELS) Adjusting the temperature Each FOOD MODE will automatically default to the recommended temperature setting for this food mode. Once you have selected the required FOOD MODE the temperature can be adjusted as desired. To increase the temperature of your selected . FOOD MODE press 1 Each light displayed will increase the temperature setting slightly. When all three lights on the right are showing this is the warmest setting.
USING YOUR APPLIANCE (RF605QD MODELS) Features Fast Freeze FAST FREEZE boosts freezing speed by dropping to its coldest temperature for 12 hours, helping retain freshness, texture and taste during the freezing process. 1 To activate, press on the internal display. The FAST FREEZE light will illuminate. 2 To deactivate before the 12 hours has again. elapsed, press When FAST FREEZE is deactivated the light is off. For best results activate the function before it is required.
USING YOUR APPLIANCE (RF605QD MODELS) An alarm will sound after 15 minutes to remind you to remove your beverage. For non water-dispensing models 2 Open the fresh food compartment door and press any button on the control panel to silence the alarm. For water-dispensing models The icon will flash on the external display. Press on the external display to silence the alarm. 3 To deactivate BOTTLE CHILL before 15 minutes, press the button on the control panel.
USING YOUR APPLIANCE (RF605QD MODELS) To flush the automatic icemaker 1 + Press and hold , and together for 4 seconds then close the door(s). The ice tray will flip twice and empty the water into the bin below. The ice tray will flip only after the doors are closed. Repeat the cycle to help remove any dust in the ice tray collected during manufacture and transport. Empty the water in the bin and return the bin correctly. Ensure that the scoop is located in front of the bin.
USING YOUR APPLIANCE (RF605QN & RF605QZ MODELS) Variable temperature zone Food modes FREEZER MODE (-18°C) SOFT FREEZE MODE (-7°C) CHILL MODE (0°C) FRIDGE MODE (3°C) For general frozen food items that require storage between 1 – 12 months. Meat, poultry, seafood, pre-cooked foods and leftovers, some fruits and vegetable, ice cream, and other frozen desserts. Allows easy portioning of food and the ability to heat, cook or serve foods straight from the compartment without waiting for it to thaw.
USING YOUR APPLIANCE (RF605QN & RF605QZ MODELS) Adjusting the temperature Each FOOD MODE will automatically default to the recommended temperature setting for this food mode, which is illuminated on the digital display. Once you have selected the required FOOD MODE the temperature can be adjusted as desired. To increase the temperature of your selected .
USING YOUR APPLIANCE (RF605QN & RF605QZ MODELS) Features Fast Freeze FAST FREEZE boosts freezing speed by dropping to its coldest temperature for 12 hours, helping retain freshness, texture and taste during the freezing process. To activate, press the button to scroll through the features to FAST FREEZE. 1 2 The light next to the feature will flash. To select the feature, press the button for two seconds until flashing light turns solid.
USING YOUR APPLIANCE (RF605QN & RF605QZ MODELS) 2 For water-dispensing models The icon will flash on the external display. Press on the external display to silence the alarm. To deactivate before the time has elapsed, press the button, scroll to BOTTLE CHILL. 3 Press button for two seconds. When BOTTLE CHILL is deactivated the light will not illuminate. Ice On/Off ICE ON/OFF activates automatic ice - this is only available in the lower compartment.
USING YOUR APPLIANCE (RF605QN & RF605QZ MODELS) To flush the automatic icemaker + 1 Press and hold 4 seconds. , and together for The ice tray will flip twice and empty the water into the bin below. Repeat the cycle to help remove any dust in the ice tray collected during manufacture and transport. Empty the water in the bin and return the bin correctly. Ensure that the scoop is located in front of the bin. Once your ice maker is turned on, discard the first 3 harvests of ice (8 cubes per harvest).
CLEANING AND CARE Exterior Clean all surfaces with liquid dishwashing detergent dissolved in warm water and a soft cloth. Rinse with clean water and dry with a clean, lint-free cloth. Do not use any abrasive stainless steel cleaners, glass cleaners, solvents or scourer pads as these will damage the door surface. For glass door products, clean the gap between the glass and the door or the handles with a toothbrush or small bottle/straw brush.
CLEANING AND CARE External display and water dispenser (Water-dispensing models only) Activate the DISPENSER LOCK to prevent water from dispensing when cleaning, refer ‘Dipenser lock’ section for details. 1 Clean the pad and external display with a damp, soft lint-free cloth. Drip tray (Water-dispensing models only) 1 Remove the drip tray from the dispenser panel. Pull the two halves of the tray apart. Clean with liquid detergent dissolved in water and a soft lint-free cloth.
CLEANING AND CARE Glass shelves – Refrigerator To remove 1 Hold the shelf firmly and pull the shelf towards you. 2 Lift the shelf up vertically. 3 Slide the shelf towards you. Cantilever glass shelves — half-width and full-width To remove 1 2 32 Hold the front and back edge of the shelf firmly. Push the shelf up vertically to dislodge from back support lugs. Slide the shelf towards you.
CLEANING AND CARE Fixed bins and Freezer bins To remove Remove food from the bin. 1 2 Hold the centre front of the bin handle. Lift vertically to unclip from the runners. Pull bin towards you to remove from the refrigerator. Push both runners back into the refrigerator. How to replace 1 2 Extend the runners out from the refrigerator. Place the bin on top of the runners. Push the bin down slowly until you feel it clip.
CLEANING AND CARE Humidity control lid To remove 1 2 Remove all shelving, follow the steps in section ‘Glass shelving’. Hold the lid firmly and lift the outside edge of the lid up vertically. Slide the lid towards the outside wall of the fridge until the lid unclips from the centre bracket. Pull the shelf towards you. Support lugs Remove all shelving, follow the steps in section ‘Glass shelves- Refrigerator’.
CLEANING AND CARE Glass shelves - Freezer (if present) To remove 1 2 Remove the bin above the glass shelf, refer to ‘Fixed bins and Freezer bins’. Push on the clips on both sides of the shelf. Lift the shelf up to remove from the supports. Ice storage bin Clean your ice bin and discard any old ice in the bottom of the bin(s) regularly. Ensure that the ice scoop is placed in correct position in the bin, right hand side or at the front of the bin (model dependent).
FOODCARE For best food care z z z z z z z z z z z Store only high-quality, fresh food in your refrigerator. Store perishable foods in the refrigerator immediately after purchase. Storing at room temperature increases the rate of deterioration and can allow harmful microbial growth. Foods such as meat, poultry and seafood should be well wrapped or sealed in suitable packaging to prevent dehydration, colour deterioration, loss of flavour, and transfer of odour.
MOVING OR STORING YOUR APPLIANCE If your refrigerator is turned off for any reason, wait 10 minutes before turning it back on. This will allow the refrigeration system pressures to equalise before restarting. Moving your refrigerator 1 Turn off the refrigerator and unplug from the power point. Remove all food. Turn the adjustable feet to the right as far as they will turn. 2 Ease the refrigerator out of its position. Tuck the power cord away, tape the shelves in place and tape the doors closed.
ACTIVESMART™ SOUNDS Normal refrigerator sounds Your refrigerator is designed with innovative ActiveSmart™ features that can produce sounds that may be different from your old refrigerator. Normal operational sounds include: z z z z z z z 38 Fan air flow sound. ActiveSmart™ refrigerators have fans which change speed depending on demand. During cooling periods, such as after frequent door openings, fans circulate the cold air in the refrigerator and freezer compartments producing some air flow sound.
TROUBLESHOOTING If there is a problem with your refrigerator, please check the following points before contacting your local Fisher & Paykel trained and supported service technician or the Customer Care Centre. Product parts and accessories can be purchased through Fisher & Paykel Customer Care Centre or online at fisherpaykel.com (this service is available to selected markets only). All models PROBLEM POSSIBLE CAUSES WHAT TO DO Refrigerator does not operate No electricity at power outlet.
TROUBLESHOOTING All models PROBLEM POSSIBLE CAUSES WHAT TO DO Unfamiliar noises Cabinet not stable or level. Refer to your Installation guide or ‘ActiveSmart™ sounds’. Freezer is defrosting. Water in the vegetable bins Condensation is formed by the water produced by fruit and vegetables. A small amount of condensation is beneficial for fruit and vegetable storage. Wipe out water with a cloth. Exterior of cabinet is warm This is normal.
TROUBLESHOOTING Ice & Water models only PROBLEM POSSIBLE CAUSES WHAT TO DO Automatic ice maker does not work Ice maker has not been turned on. Switch on ice maker. Bin is in the wrong way or there is no bin in place. Place bin so scoop is on the left side. Ice bin sits directly under ice maker on top left side of freezer. Ice cubes have odour/taste Water supply turned off or not connected. Connect water supply. Freezer compartment not working. Contact Customer Care. Water pressure too low.
TROUBLESHOOTING Ice & Water models only PROBLEM POSSIBLE CAUSES WHAT TO DO Ice build up inside freezer compartment Freezer door not closing tightly. Arrange items in freezer so door can close tightly. Ice maker makes unfamiliar sounds or seems too loud Normal ice maker operation. Refer to section ‘ActiveSmart™ sounds’. Ice boost function not increasing rate of ice production Ambient temperature very warm. Minimise door openings. 42 Check and clean door gasket seal.
TROUBLESHOOTING Ice & Water models only PROBLEM POSSIBLE CAUSES WHAT TO DO Water has poor taste/odour Refrigerator not used for an extended period. Dispense 4L of water so fresh water supply is replenished. New filter installed. Water dispenser does not work Water supply turned off or not connected. Turn water on. Supply line may be blocked. Check supply for kinks or leaks. On first installation there may be air in water system. To remove air, run 3L of water through the dispenser.
MANUFACTURER’S WARRANTY For details of your Manufacturer’s Warranty and contacts for servicing, please refer to your separate ‘Service & Warranty’ book provided with your refrigerator. This product has been designed for use in a normal domestic (residential environment). This product is not designed for any commercial use. Any commercial use by the customer will affect this products Manufacturer’s Warranty. For spare parts, please contact Fisher & Paykel Customer Care.
EUROPEAN DIRECTIVE 2012/19/EU ON WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE) GB This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate handling of this product.
ACTIVESMART™ REFRIGERATOR CONTEMPORARY QUAD DOOR FRIDGE FREEZER ICE & WATER RF605QDU, RF605QN, RF605QZ QUAD DOOR FRIDGE FREEZER NON-ICE & WATER RF605QD INSTALLATION GUIDE NZ AU UK IE SG
CONTENTS Safety and warnings 5 ActiveSmart™ Refrigerator 7 Unpacking and moving your appliance Before installation Supplied parts 8 10 11 Product dimensions 12 Cabinetry dimensions — PROUD 14 Cabinetry dimensions — FLUSH 16 Electrical 18 Water connection (Ice & Water models) 19 Flushing the water filter (Ice & Water models) 21 Positioning your refrigerator 22 Complete installation 24 Final checklist 25 Registration To register your product visit our website: fisherpaykel.
SAFETY AND WARNINGS ! WARNING! Electric Shock Hazard Failure to follow this advise may result in death, electric shock, fire or injury to persons. • Read and follow the safety and warnings outlined in this guide before operating this appliance. ! WARNING! Risk of fire/flammable material This refrigerator contains flammable refrigerant isobutane (R600a). READ AND SAVE THIS GUIDE Use this appliance only for the intended purpose as described in the user guide.
SAFETY AND WARNINGS Electrical z z z z z z z z z z This appliance must be installed in accordance with the installation instructions before use. To allow disconnection of the appliance from the supply after installation, incorporate a switch in the fixed wiring in accordance with the wiring rules. Never unplug your refrigerator by pulling on the power cord. Always grip the plug firmly and pull straight out from the outlet.
ACTIVESMART™ REFRIGERATOR Quad Door Fridge Freezer, 905mm, 605L, Ice & Water Quad Door Fridge Freezer, 905mm, 605L, Non-Ice & Water Contemporary Contemporary RF605QDU RF605QD Quad Door Fridge Freezer, 905mm, 605L, Ice & Water Contemporary RF605QNU & RF605QZU 7
UNPACKING AND MOVING YOUR APPLIANCE Check that your appliance is the correct model as per your order. Follow the steps below to move your appliance to the install location. Be careful when tilting the appliance forward/backward. Tape the door shut to prevent opening while moving the appliance. 8 1 Tilt the appliance slightly forward and Insert the hand truck between pallet and appliance. 2 Restrain the appliance with a strap. Model drawings may differ from your appliance.
UNPACKING AND MOVING YOUR APPLIANCE 3 Tilt backward to load appliance onto hand truck and push to install location. Model drawings may differ from your appliance.
BEFORE INSTALLATION Please follow the installation steps below to ensure your appliance operates correctly. Before installation Power z z z z z z Install your appliance where the plug is easily accessible. Connect your refrigerator to a separate power point. Avoid sharing the power point with other appliances. Do not use extension cords and double adaptors as the combined weight of two power cords can pull the double adaptor from the power outlet.
SUPPLIED PARTS MISCELLANEOUS ITEMS PACK ACTIVESMART™ REFRIGERATOR CONTEMPORARY QUAD DOOR FRIDGE FREEZER ICE & WATER RF605QDU, RF605QN, RF605QZ QUAD DOOR FRIDGE FREEZER NON-ICE & WATER RF605QD USER GUIDE NZ AU UK IE SG User/Installation guide (1) WATER FILTER KIT Quick fitting (1) Tubing 3.5m (1) Pressure limiting valve PLV (1) Tubing 0.
PRODUCT DIMENSIONS b C PLAN D A F G b FRONT 12 E C PROFILE
PRODUCT DIMENSIONS PRODUCT DIMENSIONS MM A Overall height of product 1790 B Overall width of product 905 C Overall depth of product (excludes handle) 688 D Depth with door open – from rear of fridge – 90° rotation E Depth with door open – from flush with door – 90° rotation 1084 396 F Height to top of chassis 1754 G Height to top of hinge cover 1775 Actual product dimensions may vary by ± 2 mm 13
CABINETRY DIMENSIONS — PROUD CUTOUT B a C CABINETRY DIMENSIONS (incl. minimum air clearances) A Inside height of cavity* RF605QD RF605QN/QZ MM MM 1810 1810 1025 985 B Inside width z z 90° rotation** full rotation C Overall depth 945 945 640 640 *Measurement includes a feet increase of 10mm. **For full drawer/shelf access, the doors need to be open past 90°. To avoid damaging the product ensure doors do not contact the adjacent cabinetry/wall.
CABINETRY DIMENSIONS — PROUD CLEARANCES C a a b b D MINIMUM CLEARANCE DIMENSIONS A Vent (above refrigerator cabinet or around top of cupboard) RF605QD RF605QN/QZ MM MM 50 50 100 60 20 20 30 30 N/A N/A 320 320 B Side clearance z z 90° rotation* full rotation C Rear clearance D Door clearance z z 90° rotation* full rotation *For full drawer/shelf access, the doors need to be open past 90°. To avoid damaging the product ensure doors do not contact the adjacent cabinetry/wall.
CABINETRY DIMENSIONS — FLUSH CUTOUT b a C CABINETRY DIMENSIONS (incl. minimum air clearances) A Inside height of cavity* RF605QD RF605QN/QZ MM MM 1810 1835 1105 1065 1105 1105 718 718 B Inside width z z 90° rotation** full rotation C Inside depth *Measurement includes a feet increase of 10mm. **For full drawer/shelf access, the doors need to be open past 90°. To avoid damaging the product ensure doors do not contact the adjacent cabinetry/wall.
CABINETRY DIMENSIONS — FLUSH CLEARANCES b b a a c d MINIMUM CLEARANCE DIMENSIONS A Vent (above refrigerator cabinet or around top of cupboard) RF605QD RF605QN/QZ MM MM 50 50 B Side clearance z z 90° rotation* full rotation C Rear clearance 100 60 100 100 30 30 N/A N/A 240 240 D Door clearance z z 90° rotation* full rotation *For full drawer/shelf access, the doors need to be open past 90°. To avoid damaging the product ensure doors do not contact the adjacent cabinetry/wall.
ELECTRICAL Electrical connection should be located in an adjacent cabinet to either side of the refrigerator or above the refrigerator cavity. We recommend the use of an isolating switch that is easily accessible to the user after the refrigerator is installed.
WATER CONNECTION (ICE & WATER MODELS) 1 Ensure the refrigerator is NOT plugged into a power supply. Locate the isolation tap for cold water connection (tee and tap fitting not supplied). 2 Locate the water fitting kit to complete water connection installation. 3 Uncoil tubing from the back of the refrigerator and connect the quick fitting. 0.15 pt 0.15 pt Connect one end of the long tubing (3.5m) to the quick fitting, and insert the other end to the PLV.
WATER CONNECTION (ICE & WATER MODELS) Insert the short tubing into the water tap adaptor, push tubing in at least 16mm before reaching the stop. 5 Pull gently on the short tubing to ensure it is locked in place. If the short tubing is already attached to the tap adaptor, move to step 6. 6 Insert the other end of the short tubing firmly to the PLV. 7 Fasten the water tap adaptor to the isolation tap. Take care not to overtighten the water tap adaptor.
FLUSHING THE WATER FILTER (ICE & WATER MODELS) 1 Press the water dispenser pad to dispense 4L of water. Wait for four minutes before dispensing again. 2 Dispense 4L of water and then wait for another four minutes. There may be carbon residue dispensed together with water. This is not harmful, and is normal during the flushing process. 3 Dispense another 4L of water. This prevents excessive dripping of water from your dispenser.
POSITIONING YOUR REFRIGERATOR Your Fisher & Paykel ActiveSmart™ refrigerator is fitted with front and rear rollers to allow you to easily move your refrigerator forward and backward. Avoid moving your refrigerator sideways to prevent damaging the rollers or the floor covering surface. Your refrigerator will arrive with the front feet wound up to assist with moving the product into its final location.
POSITIONING YOUR REFRIGERATOR What to do if your product is unstable Gently push the refrigerator back until the rear rollers contact the floor. 1 Measure the gap under the front foot, which has come off the floor. Obtain some solid packing material (hardwood, plastic, etc) which fits firmly into the gap under the foot. Wind both front feet up and roll the product out of position. 2 Place the packing material in the location diagonally opposite the front roller that lifts off the floor.
COMPLETE INSTALLATION Before placing food in the fresh food or freezer compartments z z z z 24 Remove all internal packaging. Ensure that all transit clips are removed from the refrigerator. These are small rubber stoppers located at the back of the shelves. Clean the inside of the appliance with a mix of warm water and a small amount of liquid detergent. Use a soft cloth to remove dust collected during manufacture and transport.
FINAL CHECKLIST TO BE COMPLETED BY THE INSTALLER Ensure that: Check all parts are installed. Ensure the appliance is level. Ensure all internal and external packaging is removed from the appliance before use. Ensure the water filter is installed and has been flushed. Complete and keep for safe reference: Model Serial No.
FISHERPAYKEL.COM © Fisher & Paykel Appliances 2020. All rights reserved. The models shown in this guide may not be available in all markets and are subject to change at any time. The product specifications in this guide apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time.
