Installation Guide

SAFETY AND WARNINGS

• If the water has not created ice for some time or ice

has an unpleasant taste or odour dispose of ice and

refer to ‘Before you start using the Ice & Water or

Automatic Ice function’ for flushing instructions. If

unpleasant taste or odour persists, you may wish to

fit a new filter cartridge.

• Use new tubing supplied with the refrigerator.

DO NOT reuse old tubing from old water and

ice connections.

• Your water filtration system can withstand up to

120psi (827kPa) of water pressure. Ensure the

supplied pressure reducing valve is installed before

installing the water filtration system. DO NOT install

if water pressure exceeds 120psi (827kPa).

• To reduce the risk associated with property damage

due to water leakage or flooding:

• DO NOT install systems in areas where ambient

temperatures may go above 38°C (100°F) or drop

below 0.6°C (33°F).

• DO NOT install on hot water supply lines. The

maximum operating water temperature of this filter

system is 38°C (100°F).

• DO NOT install where water hammer conditions may

occur. If water hammer conditions exist, you must

install a water hammer arrester.

• Clean the water tanks if they have not been used for

48 hours. Flush the water system connected to the

water supply if water has not been used for 5 days.