User Guide
Table Of Contents
- USER GUIDE
- Safety and warnings
- Before you begin
- Using the control panel (RF605QD models)
- Using the control panel (RF605QN & RF605QZ models)
- Using your appliance (all models)
- Using your appliance (RF605QD models)
- Using your appliance (RF605QN & RF605QZ models)
- Cleaning and care
- Foodcare
- Moving or storing your appliance
- ActiveSmart™ sounds
- Troubleshooting
- Manufacturer’s warranty
- European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE)
- INSTALLATION GUIDE
- IG Contents
- Safety and warnings
- ActiveSmart™ Refrigerator
- Unpacking and moving your appliance
- Before installation
- Supplied parts
- Product dimensions
- Cabinetry dimensions — PROUD
- Cabinetry dimensions — FLUSH
- Electrical
- Water connection (Ice & Water models)
- Flushing the water filter (Ice & Water models)
- Positioning your refrigerator
- Complete installation
- Final checklist
21
FLUSHING THE WATER FILTER (ICE & WATER MODELS)
There may be a few drips of water coming out of the dispenser for a few days after
installation. This is normal and occurs as the remaining trapped air is cleared from the system.
Ensure your refrigerator has cooled for at least 2hours beforeuse.
1 Press the water dispenser pad to dispense
4L of water. Wait for fourminutes before
dispensing again.
2 Dispense 4L of water and then wait for
another fourminutes. There may be
carbon residue dispensed together with
water. This is not harmful, and is normal
during the flushing process.
3 Dispense another 4L of water. This
prevents excessive dripping of water from
your dispenser.