User Guide
Table Of Contents
- USER GUIDE
- Safety and warnings
- Before you begin
- Using the control panel (RF605QD models)
- Using the control panel (RF605QN & RF605QZ models)
- Using your appliance (all models)
- Using your appliance (RF605QD models)
- Using your appliance (RF605QN & RF605QZ models)
- Cleaning and care
- Foodcare
- Moving or storing your appliance
- ActiveSmart™ sounds
- Troubleshooting
- Manufacturer’s warranty
- European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE)
- INSTALLATION GUIDE
- IG Contents
- Safety and warnings
- ActiveSmart™ Refrigerator
- Unpacking and moving your appliance
- Before installation
- Supplied parts
- Product dimensions
- Cabinetry dimensions — PROUD
- Cabinetry dimensions — FLUSH
- Electrical
- Water connection (Ice & Water models)
- Flushing the water filter (Ice & Water models)
- Positioning your refrigerator
- Complete installation
- Final checklist
24
COMPLETE INSTALLATION
Before placing food in the fresh food or freezer compartments
z
Remove all internal packaging. Ensure that all transit clips are removed from the
refrigerator. These are small rubber stoppers located at the back of the shelves.
z
Clean the inside of the appliance with a mix of warm water and a small amount of liquid
detergent. Use a soft cloth to remove dust collected during manufacture and transport.
z
Allow the refrigerator and freezer to run empty for 2 – 3 hours to allow each
compartment to cool to the appropriate temperature.
z
The appliance may have an odour on its initial operation, this will go when the
refrigerator and freezer have cooled sufficiently.