User Guide
Table Of Contents
- USER GUIDE
- Contents
- Safety and warnings
- Before you begin
- Using the control panel (RF605QD models)
- Using the control panel (RF605QN & RF605QZ models)
- Storage features (All models)
- Using your appliances (All models)
- Using your appliance (RF605QD models)
- Using your appliance (RF605QN & RF605QZ models)
- Wifi connection
- Cleaning and care
- Foodcare
- Moving or storing your appliance
- User warnings and sounds
- Troubleshooting
- Manufacturer’s warranty
- European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE)
31
USING YOUR APPLIANCE (ALL MODELS)
To flush the automatic icemaker
1
Press and hold , and together for
4seconds then close the door(s). The ice
tray will flip twice and empty the water
into the bin below. The ice tray will flip
only after the doors are closed.
Repeat the cycle to help remove any
dust in the ice tray collected during
manufacture and transport.
Empty the water in the bin and return the bin correctly. Ensure that the scoop is located in
front of the bin.
Once your ice maker is turned on, discard the first 3harvests of ice (8cubes per harvest).
This will flush away any impurities in the water line and ensure the best ice quality.
Carrying out the above steps after a holiday/vacation or extended periods of not using ice.
Press the water dispenser pad to dispense 4L
of water.
Wait for 4 minutes before dispensing again.
Dispense another 4L of water. Your water
dispenser is now ready for use.
Water will continue to drip from the dispenser
for a few more days after installation as the
remaining trapped air is released from the
system.
NOTE: There may be carbon residue dispensed
together with water. This is not harmful, and
normal during flushing process.
To flush through the water dispenser
Flushing the water filter
Before you start using the Ice & Water function, complete the flushing steps to ensure
optimum performance of your water filter.