ACTIVESMART™ REFRIGERATOR CONTEMPORARY STYLE ICE & WATER, AUTOMATIC ICE NON-ICE & WATER E372B, E402B, E442B, E522B, RF372B, RF402B, RF442B, RF522B, RF522W, RF522A, RF610A & RF540A INSTALLATION GUIDE / USER GUIDE NZ AU GB IE EU AE HK SG
CONTENTS Introduction 4 Safety and warnings 5 Installation instructions 9 Moving or storing your appliance 22 ActiveSmart™ operating instructions 23 All about the external display (Ice & Water models only) 27 Using your water dispenser (Ice & Water models only) 28 Water filter (Ice & Water and Automatic Ice models only) 29 Using your ice maker (Ice & Water and Automatic Ice models only) 30 ActiveSmart™ special features Cleaning and caring for your refrigerator 31 34 Foodcare 38 Moving
INTRODUCTION Thank you for buying a Fisher & Paykel ActiveSmart™ refrigerator. At Fisher & Paykel we are very proud of this refrigerator. This refrigerator combines size and storage space with the latest features and functions. Thousands of hours of food care research and refrigeration experience has been programmed into your refrigerator to give you the best possible performance. We hope you enjoy your new refrigerator.
SAFETY AND WARNINGS WARNING! Electric Shock Hazard Failure to follow this advise may result in death, electric shock, fire or injury to persons. • Read and follow the safety and warnings outlined in this user guide before operating this appliance. WARNING! Risk of fire/flammable material This refrigerator contains flammable refrigerant isobutane (R600a). READ AND SAVE THIS GUIDE Use this appliance only for the intended purpose as described in this user guide.
SAFETY AND WARNINGS z z z This refrigerating appliance is optimally intended to be used at ambient temperatures ranging from 16 °C to 38 °C. This refrigerating appliance is not intended to be used as a built-in appliance. To avoid hazard due to instability of the appliance, it must be fixed in accordance with installation instructions. Electrical z z z z z z z z z z This appliance must be installed in accordance with the installation instructions before use.
SAFETY AND WARNINGS Disposal z Extreme care must be taken when disposing of your old appliance to avoid hazards: The flammable refrigerant gas must be safely removed. z The thermal insulation foam in this appliance contains flammable insulation blowing gases, any exposed foam may be highly flammable and must be carefully treated during disposal. z The doors and panels should be removed and the shelves left in place so that children may not easily climb inside.
SAFETY AND WARNINGS z z z z z z z z z z z z z z Installation and use MUST comply with all state and local plumbing codes. Check with your local public works department for plumbing codes. You must follow their guidelines as you install the water filtration system. To avoid serious illness or death, only connect your water filter to safe drinking water. When installing the product use new tubing supplied with the refrigerator, DO NOT reuse any existing water connections.
INSTALLATION INSTRUCTIONS Please follow the installation steps below to ensure your appliance operates correctly. 1. Power z z z z The appliance must be installed so the plug is accessible. To ensure that the appliance is not accidentally switched off, connect your refrigerator to its own power point. Do not plug in any other appliance at this power point or use extension cords and double adaptors, as the combined weight of both power cords can pull the double adaptor from a wall outlet socket.
INSTALLATION INSTRUCTIONS 4. Product and cabinetry dimensions If integrating your refrigerator, please follow installation instructions provided with the integration kits.
INSTALLATION INSTRUCTIONS E372B RF372B E402B RF402B E442B RF442B PRODUCT DIMENSIONS E522B RF522B MM A Overall height of product 1620 1720 1720 1720 B Overall width of product 1620 1720 1720 1720 n/a 695 695 695 C Overall depth of product (excl. handle, includes evaporator) CABINETRY DIMENSIONS (incl.
INSTALLATION INSTRUCTIONS 4. Product and cabinetry dimensions If integrating your refrigerator, please follow installation instructions provided with the integration kits.
INSTALLATION INSTRUCTIONS RF522W RF522A RF610A/ RF540A PRODUCT DIMENSIONS RF610AZ MM A Overall height of product 1720 1720 1800 1790 B Overall width of product 790 790 900 900 C Overall depth of product (excl. handle, incl. evaporator tray) 695 695 695 699 CABINETRY DIMENSIONS (incl.
¾” OD x 3/16” ID Flat Washer INSTALLATION INSTRUCTIONS #10-32 Pan Head Pozi Drive Wall Plug #10x 3” Countersunk Pozidrive Self tapping Screw #8 x 3/4” Truss Head Philips Drive Self Tapping Screw 5.
INSTALLATION INSTRUCTIONS Installation instructions: 1 Ensure the refrigerator is NOT plugged into a power supply. 2 Locate a cold water supply/feed that is suitable for a water connection. 3 Connect the tap connection fitting (A) to the tap. Connect the short tubing (B) to the outlet of the tap and secure with the locking key (C) (refer to Diagram 1) 4 Connect the inlet of the PLV (D) to the tubing connected to the tap (refer to Diagram 2). Ensure the arrow on the PLV is pointing away from the tap.
INSTALLATION INSTRUCTIONS 4M P 8x na T o eH xr M da irD ca ev enih cS er w ¼ 2- P x 0 na P ”½ aeH pilih M d s ca irD nih ev S e c er w c er w # x 8 rT /3 u ”4 H ss ilihP S e p le da rD s aT f i p ev nip Sg kn 1# x0 oC ”3 tnu oP re diz eS us evir at fl pp ni Sg 1# -0 P 23 na oP eH iz W da irD lla ev ulP g c er w e sr oH do aF ts ne P or PF D ”¾ O alF xD t /3 saW 61 h I ” re 4M P 8x n a T o eH xr M da irD ca ev enih cS er w ¼ 2- P x 0 na P ”½ aeH pilih M d s ca irD nih ev S e c er w c er w #
INSTALLATION INSTRUCTIONS z z z z z All connections must be checked for leaks. Ensure 6mm tubing is routed away from sharp objects, sharp corners (beware of kinking the tube as this will stop water flow), clear of the refrigerator rear compartment and not in a location where it can be kinked or squashed. Ensure all push-fit connections are firmly pushed into place. The tube should push in 16mm before reaching the stop. If tubing is removed at any point, re-cut the end and re-insert.
INSTALLATION INSTRUCTIONS Before you start using the Ice & Water or Automatic Ice function z z z Check your refrigerator is switched on. Allow at least 2 hours for your refrigerator to cool before use. Complete all the flushing steps detailed in this installation/user guide to ensure optimum performance of your water filter. For Ice & Water models only: 1 Press the water dispenser pad to dispense 2L of water. There may be carbon residue dispensed together with water.
INSTALLATION INSTRUCTIONS 6. Installation (all models) Your Fisher & Paykel ActiveSmart™ refrigerator is fitted with front and rear rollers, designed for moving the product in the forwards and backwards direction. Avoid moving the product in a sideways direction as this may damage the rollers or the floor covering/surface. A Your refrigerator will arrive with the front feet wound up making moving the product into its final location a simple task.
INSTALLATION INSTRUCTIONS 8. What to do if your product is unstable A Gently push the refrigerator back until the rear rollers contact the floor. z Measure the gap under the front foot, which has come off the floor. z Obtain some solid packing material (hardwood, plastic, etc.) which fits firmly into the gap under the foot. Note: do not use metallic materials that may corrode, stain and/or damage floor coverings. B Wind both front feet up and roll the product out of position.
INSTALLATION INSTRUCTIONS Before placing food in the fresh food or freezer compartments z z z z Remove all internal packaging. Ensure that all transit clips are removed from the refrigerator. These are small rubber stoppers located at the back of the shelves. Clean the inside of the appliance with a mix of warm water and a small amount of liquid detergent, and a soft cloth to remove manufacturing and transportation dust.
MOVING OR STORING YOUR APPLIANCE If your refrigerator is turned off for any reason, wait 10 minutes before turning it back on. This will allow the refrigeration system pressures to equalise before restarting. Moving your refrigerator z z z z Turn off the appliance and unplug from the power point. Remove all food. Turn the adjustable feet to the right as far as they will turn. Ease the refrigerator out of its position. Tuck the power cord away, tape the shelves in place and tape the doors closed.
ACTIVESMART™ OPERATING INSTRUCTIONS Models: 635mm wide 680mm wide 790mm wide 900mm wide E372B, E402B, RF372B, RF402B E442B, RF442B E522B, RF522A, RF522W, RF522B RF610A/RF540A The control panel enables you to view and modify features and options on your refrigerator. Temperature control (all models) z z z z The powerful cooling system will automatically cool both refrigerator and freezer compartments to their recommended ideal temperatures — 3°C refrigerator and -18°C freezer.
ACTIVESMART™ OPERATING INSTRUCTIONS Fresh food compartment (all models) z z z The fresh food compartment light will automatically be illuminated. The temperature for this compartment will show as a series of lights. The temperature may be altered by pressing the or buttons. One press on either of these buttons will reduce or increase the number of lights by one which indicates a small change in temperature. Fewer lights illuminated means a cooler temperature for the compartment selected.
ACTIVESMART™ OPERATING INSTRUCTIONS Key Mute (all models) KEY MUTE allows you to silence all button presses. z z z z z z To activate KEY MUTE and silence buttons, press and hold the button for 4 seconds. The icon on the internal control panel will be illuminated. The keys will be silenced when KEY MUTE is activated. Door alarms and BOTTLE CHILL alarm will still operate. KEY MUTE will not automatically deactivate. To manually deactivate, press and hold the button for 4 seconds.
ACTIVESMART™ OPERATING INSTRUCTIONS Special Functions These features will temporarily change the temperature of the compartment. The default setting will remain unchanged. Bottle Chill (selected models only) This function allows you to chill your beverages more rapidly in the freezer without the worry of forgetting them. The timer is set for 15 minutes however the time taken to chill depends on the size of your beverage.
ALL ABOUT THE EXTERNAL DISPLAY (ICE & WATER MODELS ONLY) This screen enables you to lock the water dispenser, indicates to you when BOTTLE CHILL is activated and when your water filter requires changing. EXTERNAL DISPLAY FEATURES Dispenser lock button and LED light Locks/unlocks the water dispenser. Bottle Chill indicator Icon will illuminate indicating when BOTTLE CHILL is activated and flashes when beverage is ready.
USING YOUR WATER DISPENSER (ICE & WATER MODELS ONLY) Dispensing z z z Your water dispenser has been designed for onehanded operation. To dispense water push the dispensing pad gently, using a glass or container. This pad requires only a gentle press to activate. To stop the flow of water, simply pull your glass away from the dispensing pad. Please remember that pressing very hard against the dispensing pad will not encourage the dispenser to operate faster or produce greater quantities of water.
WATER FILTER (ICE & WATER AND AUTOMATIC ICE MODELS ONLY) Water filter The water supplied to your refrigerator is filtered to remove impurities through a filter located internally at the top right corner of the refrigerator. Replace your filter cartridge every 6 months. z z There is a replacement indicator icon on the internal control panel and external display which will appear when the filter needs replacing. The icon will flash, as a reminder, when water is dispensed.
USING YOUR ICE MAKER (ICE & WATER AND AUTOMATIC ICE MODELS ONLY) Ice On/Off Your ice maker is designed to automatically dispense ice until it senses that the bin is full. So the more ice you use, the more it makes. To turn your ice maker on, press the button. The light above the ICE ON/OFF icon will be illuminated when the ice maker is on. Ensure all bins are in place when the ice making function is activated.
ACTIVESMART™ SPECIAL FEATURES Manual ice system (selected models only) An ice storage bin which sits inside the upper top freezer bin provides storage for and gives you access to clean, clear ice cubes. Upper left freezer bin, ice storage bin, ice tray, lid and scoop in correct position Accessing your ice Information about your manual ice system z z z z z z z To make ice, take the ice tray and lid from the top of the ice storage bin. Remove the lid from the ice tray and fill the tray with water.
ACTIVESMART™ SPECIAL FEATURES Fruit and vegetable bins and humidity control lid The fruit and vegetable bins feature a unique lid which provides two functions: z z The humidity lid seals the bins and provides a humid microclimate to extend storage times of fruit and vegetables. The humidity lid prevents condensation, which forms at high humidities, from dripping down onto the fruit and vegetables by retaining it in the grooves of the lid.
ACTIVESMART™ SPECIAL FEATURES Slim storage drawer (where fitted) The slim bins at the bottom of the fresh food compartment provide storage space for items that you may want to keep separate from the rest of the refrigerator. These slim storage bins can be used for deli item storage, beverages or for defrosting foods. Bottle holder (where fitted) z z z z The bottle holders can be used to store Slim storage drawer a variety of bottles.
CLEANING AND CARING FOR YOUR REFRIGERATOR Exterior doors z z z Clean the exterior door with liquid dishwashing detergent dissolved in warm water and a soft cloth. Dry the door with a lint-free cloth. Do not use any abrasive stainless steel cleaners, glass cleaners, solvents or scourer pads as these will damage the door surface. Other exterior surfaces z z Clean all other exterior surfaces with a mix of warm water and liquid dishwashing detergent, and a soft cloth.
CLEANING AND CARING FOR YOUR REFRIGERATOR Interior z z z z z z z It is important to keep the interior of the refrigerator and freezer clean to help prevent food from becoming contaminated during storage. The amount and types of food stored determines how often cleaning should be carried out in the refrigerator (ideally once every 1 to 2 weeks). Remove the shelves from cabinet and door. Wash shelves and storage bins in warm water and detergent; rinse in clean water and dry before replacing.
CLEANING AND CARING FOR YOUR REFRIGERATOR Humidity Control System When cleaning the shelf above the vegetable bins, we recommend that you do not disassemble the Humidity Control System from the shelf. In the event that the humidity control lid (plastic lid) and humidity slides become separated from the glass shelf, follow these instructions to reassemble. Retainer Humidity Slides 1 Turn shelf upside down. 2 To attach humidity slides onto shelf front corners, fit bottom clips into shelf front trim.
CLEANING AND CARING FOR YOUR REFRIGERATOR To remove trays or fixed bins z z z z For ease of removal, empty food from tray/bin first. Hold the centre front of the tray/bin handle. Lift vertically to unclip from the runners and pull tray/bin towards you to remove. Push both runners back into refrigerator. To replace trays or fixed bins: Tray removal With the runners pushed back into the refrigerator, place the tray/bin on top of the runners.
FOODCARE For best food care z z z z z z z z z z Store only high-quality, fresh food in your appliance. Store perishable foods in the appliance immediately after purchase. Storing at room temperature increases the rate of deterioration and can allow harmful microbial growth. Storing at temperatures other than settings recommended may impact the storage life.
MOVING OR STORING YOUR APPLIANCE If your refrigerator is turned off for any reason, wait 10 minutes before turning it back on. This will allow the refrigeration system pressures to equalise before restarting. Moving your refrigerator z z z z z Take care when moving this refrigerator, ensure all obstacles are removed to prevent any physical impact that may cause damage. Turn off the refrigerator and unplug from the power point. Remove all food.
ACTIVESMART™ USER WARNINGS AND SOUNDS User warnings Faults In the unlikely event a fault occurs the icon will illuminate on the internal control panel and an alarm will sound when the fresh food compartment door is opened. z z Please count the number of beeps made when the fresh food compartment door is opened. Please also take note of the number and sequence of temperature lights displayed on the internal control panel and contact our Customer Care Centre.
TROUBLESHOOTING If there is a problem with your appliance, please check the following points before contacting your local Fisher & Paykel trained and supported service technician or the Customer Care Centre. Product parts and accessories can be purchased through Fisher & Paykel Customer Care Centre or online at fisherpaykel.com (this service is available to selected markets only). All models PROBLEM POSSIBLE CAUSES WHAT TO DO Appliance does not operate. No electricity at power outlet.
TROUBLESHOOTING All models PROBLEM POSSIBLE CAUSES WHAT TO DO Water in the vegetable bins. Condensation is formed by the water produced by fruit and vegetables. A small amount of condensation is beneficial for fruit and vegetable storage. Wipe out water with a cloth. Set humidity slide to low humidity setting 42 Exterior of cabinet is warm. This is normal. Warm spot on central door seal. (French door models only).
TROUBLESHOOTING Ice & Water and Automatic Ice models only PROBLEM POSSIBLE CAUSES WHAT TO DO Automatic ice maker does not work. Ice maker has not been turned on. Switch on ice maker. Bin is in the wrong way or there is no bin in place. Place bin so scoop is on the right side. Water supply turned off or not connected. Connect water supply. Freezer compartment not working. Contact Customer Care. Water pressure too low. Check water pressure. Water line kinked/squashed.
TROUBLESHOOTING Ice & Water and Automatic Ice models only PROBLEM POSSIBLE CAUSES WHAT TO DO Wet ice/ ice clumping. Low water pressure. Check water pressure. Filter blocked. Replace filter. Long freezer door openings. Gently tap ice with scoop to unstick or, if large clumps occur, empty ice bin and make new ice. High ambient temperature. Ice bin left out of freezer compartment for a length of time. Ice will stick together over time. Filter warning light is flashing. Filter needs replacing.
TROUBLESHOOTING Ice & Water models only PROBLEM POSSIBLE CAUSES WHAT TO DO Water has poor taste/odour. Refrigerator not used for an extended period. Dispense 4L of water so fresh water supply is replenished. Water dispenser does not work. Water supply turned off or not connected. Turn water on. Supply line may be blocked. Check supply for kinks or leaks. On first installation there may be air in water system. To remove air, run 3L of water through the dispenser.
MANUFACTURER’S SERVICE & WARRANTY For details of your Manufacturer’s Warranty and contacts for servicing, please refer to your separate ‘Service & Warranty’ book provided with your refrigerator. This product has been designed for use in a normal domestic (residential environment). This product is not designed for any commercial use. Any commercial use by the customer will affect this products Manufacturer’s Warranty. For spare parts, please contact Fisher & Paykel Customer Care.
EUROPEAN DIRECTIVE 2012/19/EU ON WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE) GB This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate handling of this product.
FISHERPAYKEL.COM © Fisher & Paykel Appliances 2020. All rights reserved. The models shown in this guide may not be available in all markets and are subject to change at any time. The product specifications in this guide apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time.
