User Guide
Table Of Contents
- Contents
- Introduction
- Safety and warnings
- Installation instructions
- Moving or storing your appliance
- ActiveSmart™ operating instructions
- All about the external display (Ice & Water models only)
- Using your water dispenser (Ice & Water models only)
- Water filter (Ice & Water and Automatic Ice models only)
- Using your ice maker (Ice & Water and Automatic Ice models only)
- ActiveSmart™ special features
- Cleaning and caring for your refrigerator
- Foodcare
- Moving or storing your appliance
- ActiveSmart™ user warnings and sounds
- Troubleshooting
- Manufacturer’s Service & Warranty
- European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE)
44
TROUBLESHOOTING
Ice & Water and Automatic Ice models only
PROBLEM POSSIBLE CAUSES WHAT TO DO
Wet ice/
iceclumping.
Low water pressure. Check water pressure.
Filter blocked. Replace filter.
Long freezer door openings. Gently tap ice with scoop to unstick
or, if large clumps occur, empty ice bin
and make new ice.
High ambient temperature.
Ice bin left out of freezer compartment
for a length of time.
Ice will stick together over time.
Filter warning light
is flashing.
Filter needs replacing. Replace filter as soon as possible.
Ice buildup
inside freezer
compartment.
Freezer door not closing tightly. Arrange items in freezer so door can
close tightly.
Check and clean door gasket seal.
Ice maker makes
unfamiliar sounds
or seems too loud.
Normal ice maker operation. Refer to section ‘ActiveSmart™ user
warnings and sounds’.
Ice boost function
not increasing rate
of ice production.
Ambient temperature very warm. Minimise door openings.
Refrigerator is in high usage.