User Guide
Table Of Contents
- Introduction
- Safety and warnings
- Before you begin
- First use
- Using the oven light
- Using the kitchen timer
- Changing the time
- Locking the control panel
- Unlocking the control panel
- Cooking options
- Guided cooking
- Cooking guide
- Cooking charts
- Induction cookware
- Cooktop use
- User preference settings
- WiFi connection and remote mode
- Sabbath Mode
- Care and cleaning
- Using Self Clean
- Troubleshooting
- Alert codes
- Warranty and service
45
COOKTOP USE
RIV3-304 induction zone display RIV3-365 induction zone display
ICON MEANING
Cooking zone off (not activated)
Cooking zone on (activated but not operating).
GentleHeat low setting
GentleHeat medium setting
GentleHeat simmer setting
Power levels
Auto RapidHeat feature
4 3 2 1 0
9 8 7 2 1 0 1 0
OFF A
9 8 7
PowerBoost feature
Hot Surface indicator
Pan detection indicator
Childlock
Bridged zone indicator
At the front of the induction surface is the display for each individual cooking zone. Each
zone display is activated by it’s corresonding control dial.
If no suitable cookware is detected on the selected cooking zone, the cooktop will
automatically turn off after 10 minutes. If the display flashes alternately with the heat
setting this indicates:
zz
cookware has not been placed on the correct cooking zone,
zz
cookware is not suitable for induction cooking, or
zz
cookware is too small or not properly centred on the cooking zone.