Planning Guide Integrated Column Freezer

Model nos:
RS1884FRJ1 / RS1884FRJK1
NOTE: Left hand hinge model is a mirrored version of image
shown.
RS1884FLJ1 / RS1884FLJK1
Custom Panel Preparation
Dimensions are shown in millimetres (mm)
Dimensions apply for the preparation and installation of custom panels
Handles
Ensure handle screw heads are countersunk into back of panel to avoid
interfering with hanging bracket, and clear of side brackets as indicated.
Dwg & Dxf Files
Dwg and Dxf files of the panel preparation are available within the download
folder for this product and can be found on
http://thekitchentools.fisherpaykel.com
DATE: 10.10.2018
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
CUSTOM PANEL PREPARATION
18" Integrated Column Freezer
457MM
COLUMN DOOR PANEL
REAR VIEW
DO NOT PLACE
HANDLE HOLES IN
THESE LOCATIONS
PILOT HOLES ONLY.
DO NOT PENETRATE
FRONT SURFACE
1778
1270
508
127
50
50
50
50
33
451
60
90
20
18 x Ø2
51
225
2029
FOR 152MM TOEKICK, MAKE
DOOR LENGTH 50MM SHORTER
FOR 50MM TOEKICK, MAKE
DOOR LENGTH 52MM LONGER