Installation Guide

44
@5 OPTIONAL — CHANGING OVER DOOR HINGES
Required components/tools:

2x K05 Top adapter bracket

2x K05 Bottom adapter bracket

T20 star screwdriver

Flat head screwdriver
Door brackets
1 Remove the top adapter bracket from the top of the door by unscrewing
M5x10 screws (4x) (A).
2 Install the new top adapter bracket into the other side of the top of the door
with M5x10 screws (4x) (B).
3 Remove the door panel locking bracket and washer from the bottom of the
door by unscrewing M6x25 screw (1x) (C).
4 Remove the bottom adapter bracket and spacer from the bottom of the door
by unscrewing M6x25 screws (2x) and M5x30 screw (1x) (D).
5 Install the new bottom adapter bracket and existing spacer to the other side
of the door with M6x25 screws (2x) and M5x30 screw (1x) (E).
6 Install the existing door panel locking bracket and washer to the other side of
the door with M6x25 screw (1x) (F).
D
E
F
A
B
C
(use new bottom adaptor
bracket and spacer)
(use new top adaptor bracket)
(use existing locking bracket)