Installation Guide
Table Of Contents
- Safety and warnings
- Integrated refrigerator & freezer
- Integrated refrigerator-freezer
- Integrated wine cabinet
- Supplied parts
- Required parts
- Door panel kit
- Handle kit
- Hinge change kit
- Wine display accessories
- Tools
- Product dimensions
- Cabinetry dimensions — Single installation
- Cabinetry dimensions — Multiple installation
- Stainless steel Door panel dimensions — Single installation
- Custom Door panel dimensions — Single installation
- Custom Door panel dimensions — Multiple installation
- Toe kick dimensions
- Installation options
- Door clearance
- Drawer clearance
- Electrical and plumbing
- Custom door panel install dimensions
- Before installation
- Cavity preparation
- Appliance preparation
- Door panel preparation — Stainless steel panel
- Door panel preparation — Custom panel
- Door panel preparation — Wine cabinet only
- Power and water supply connection
- Install water filter
- Single installation — Align appliance into cabinetry
- Single installation — Secure appliance into cabinetry
- door panel installation
- Toe kick installation
- Grilles installation
- Carbon filter installation
- Air flow divider installation
- Cabinet trims installation
- Top trim & hinge pocket covers installation
- Multiple installation — Appliance preparation
- Multiple installation — Align first appliance into cabinetry
- Multiple installation — Secure first appliance into cabinetry
- Multiple installation — Align second appliance into cabinetry
- Multiple installation — Secure second appliance into cabinetry
- Multiple installation — Install cabinet trims
- Wine display for Wine cabinet (optional)
- Change the door hinges (optional)
- Final checklist
61
A
b
f
e
D
c
CHANGE THE DOOR HINGES (OPTIONAL)
1 Reinstall the hinge top bracket and bracket spacer with M5x12 countersunk
screws (A) onthe new hinge side at the other side of theappliance.
2 Install the new hinge pocket and alcove top bracket on the new hinge side using
two (2x) M6x16 countersunk screws (B).
z
The new hinge pocket and top alcove bracket are supplied with the hinge kit.
3 Install the new hinge in the new hinge pocket by screwing M6x16 countersunk
screws (2x) (C).
4 Open the hinge (D) and clip the top hinge pocket cover (E) to the
top hinge pocket.
5 Install a new top alcove bracket on the new
non-hinge side (F).
1 Reinstall the middle hinge
bracket and spacer with M5x12
countersunk screws (A).
2 Open the middle hinge (B) and
reinstall the hinge with M6x16
countersunk screws (C).
C
B
A
Re-attaching the top door hinge
Re-attaching the middle door hinge — Refrigerator-Freezer
1 Install a new lower hinge bracket
on the new hinge side with M6x16
screws (2x) (A).
2 Ensure that the tab on the top of the
bracket inserts into the slot in the
plinth front bracket.
3 Use the hinge that was removed from
the top of the appliance and insert
the tabs into the hinge lower bracket.
Rotate the hinge into place and fix with
M5x12 countersunk screws (2x) (B).
4
Open the hinge (C), and install the new
top grille assembly.
5
Fasten in place with #8x16 screws (3x)
(D). One each at the bottom left and
right of the grille and one behind the
water filter hatch.
6
Clip the bottom hinge pocket cover to
the new hinge pocket (E).
Re-attaching the bottom door hinge — Refrigerator or Freezer / Wine Cabinet
E
d
C
A
B
D
D