User Manual
Table Of Contents
- 1 Safety and warnings
- 2 Integrated columns
- 3 Components list
- 4 Product dimensions and specifications
- 5 Cabinetry options
- 6 Cavity dimensions
- 7 Door and toe kick panel dimensions
- 8 Custom door panel dimensions
- 9 Door opening rotation
- 10 Electrical and plumbing
- 11 Before installation
- 12 Unpacking and moving your product
- 13 Attach the anti-tip bracket
- 14 Connect to water and power supply
- 15 Single installation
- 16 Dual installation
- 17 Install water filter
- 18 Install brackets to door panel (Stainless steel)
- 19 Install brackets to door panel (Custom)
- 20 Install door panels
- 21 Install toe kick
- 22 Install kickstrip grille
- 23 Install cabinet trims
- 24 Install flow divider and door trims
- 25 Optional — Changing over door hinges
- 26 Final checklist
9
6CAVITY DIMENSIONS
SINGLE INSTALL DUAL INSTALL
RS18 RS24 RS30 RS18 + RS24 RS18 + RS30 RS24 + RS24 RS24 + RS30 RS30 + RS30
CAVITY DIMENSIONS inches (mm) inches (mm) inches (mm) inches (mm) inches (mm) inches (mm) inches (mm) inches (mm)
A
Overall height of cavity 84” (2134) 84” (2134) 84” (2134) 84” (2134) 84” (2134) 84” (2134) 84” (2134) 84” (2134)
b
Overall width of cavity 18” (457) 24” (610) 30” (762) 42” (1067) 48” (1219) 48” (1219) 54” (1372) 60” (1524)
c
Minimum overall depth of cavity* 25” (635) 25” (635) 25” (635) 25” (635) 25” (635) 25” (635) 25” (635) 25” (635)
d
Minimum cabinetry gap clearance from edge
of door panels
1/8” (3) 1/8” (3) 1/8” (3) 1/8” (3) 1/8” (3) 1/8” (3) 1/8” (3) 1/8” (3)
e
Minimum required finished return 4” (102) 4” (102) 4” (102) 4” (102) 4” (102) 4” (102) 4” (102) 4” (102)
* Assumes a door panel thickness of 3/4” (19mm).
Note: These dimensions are intended for ‘Flush Installation’ only.
E
D
D
Flush with front
of cabinetry
PLAN VIEW
E
D
D
E
E
D
D
E
B
A
C
B
A
C
Frameless: finished return
cavity sides and top
Framed: finished return
cavity sides and top