User Manual
Table Of Contents
- 1 Safety and warnings
- 2 Integrated columns
- 3 Components list
- 4 Product dimensions and specifications
- 5 Cabinetry options
- 6 Cavity dimensions
- 7 Door and toe kick panel dimensions
- 8 Custom door panel dimensions
- 9 Door opening rotation
- 10 Electrical and plumbing
- 11 Before installation
- 12 Unpacking and moving your product
- 13 Attach the anti-tip bracket
- 14 Connect to water and power supply
- 15 Single installation
- 16 Dual installation
- 17 Install water filter
- 18 Install brackets to door panel (Stainless steel)
- 19 Install brackets to door panel (Custom)
- 20 Install door panels
- 21 Install toe kick
- 22 Install kickstrip grille
- 23 Install cabinet trims
- 24 Install flow divider and door trims
- 25 Optional — Changing over door hinges
- 26 Final checklist
36
@2INSTALL KICKSTRIP GRILLE
Adjusting the kickstrip grille
1 Loosen the cap screws of the adjustment brackets from both sides of the plinth using a
hex key (A).
2 Adjust the kickstrip to the desired depth by moving it forward/backward (B).
3 Re-tighten the cap screws of the adjustment brackets on both sides using the hex key.
Required components/tools:
hex key (supplied)
1x fixed (top) grille
1x bottom (movable) grille
8x16mm pan head screws
IMPORTANT!
For toe kick heights 41/2”–5” (114–127mm), shorten the lower grille by cutting along the
vertical ribs.
For 2” (51mm) toe kick height, an additional lower grille can be ordered.
For toe kick heights greater than 5” (127mm), lower grille is not required.
Refer to ‘Door and toe kick panel dimensions’ for more information.
5 Install the bottom
(movable) grille (E) with
8x16mm pan head screws.
BA
Toe kick and kickstrip grille
complete installation
For toe kick heights 41/2”–5”
(114–127mm), shorten the
bottom grille by cutting along
the vertical ribs (F).
F
Attach the top and bottom grilles
4 Install the top (fixed) grille
(C) with 8x16mm pan head
screws and reinstall bottom
hinge pocket cover (D).
C
D
E