User Manual
Table Of Contents
- 1 Safety and warnings
- 2 Integrated columns
- 3 Components list
- 4 Product dimensions and specifications
- 5 Cabinetry options
- 6 Cavity dimensions
- 7 Door and toe kick panel dimensions
- 8 Custom door panel dimensions
- 9 Door opening rotation
- 10 Electrical and plumbing
- 11 Before installation
- 12 Unpacking and moving your product
- 13 Attach the anti-tip bracket
- 14 Connect to water and power supply
- 15 Single installation
- 16 Dual installation
- 17 Install water filter
- 18 Install brackets to door panel (Stainless steel)
- 19 Install brackets to door panel (Custom)
- 20 Install door panels
- 21 Install toe kick
- 22 Install kickstrip grille
- 23 Install cabinet trims
- 24 Install flow divider and door trims
- 25 Optional — Changing over door hinges
- 26 Final checklist
37
@3INSTALL CABINET TRIMS
Install the side trims
Note: Four (4) dual-lock strips are pre-installed along each side trim.
4 Slot trim in behind top hinge pocket (E), then press (F)
adhesive to cavity ensuring trim is also tight against
appliance inner face.
1 Peel off the liners from the dual-lock strips. (A)
A
3 Slide the trim behind the lower hinge (C), then the top
hinge (D). Hold the same angle when sliding the trim.
Required components/tools:
1x alcove side trim assembly (848193)
Slide trim in behind lower hinge, then top hinge
Reveal dual-lock adhesive
Slot trim in behind hinge pocket, then press adhesive to cavity
ensuring trim is also tight against fridge inner face.
D
C
E
F
2 Position the trim on the throat with anangle. (B)
B B