User Manual
Table Of Contents
- 1 Safety and warnings
- 2 Integrated columns
- 3 Components list
- 4 Product dimensions and specifications
- 5 Cabinetry options
- 6 Cavity dimensions
- 7 Door and toe kick panel dimensions
- 8 Custom door panel dimensions
- 9 Door opening rotation
- 10 Electrical and plumbing
- 11 Before installation
- 12 Unpacking and moving your product
- 13 Attach the anti-tip bracket
- 14 Connect to water and power supply
- 15 Single installation
- 16 Dual installation
- 17 Install water filter
- 18 Install brackets to door panel (Stainless steel)
- 19 Install brackets to door panel (Custom)
- 20 Install door panels
- 21 Install toe kick
- 22 Install kickstrip grille
- 23 Install cabinet trims
- 24 Install flow divider and door trims
- 25 Optional — Changing over door hinges
- 26 Final checklist
45
@5OPTIONAL—CHANGING OVER DOOR HINGES
Top hinge
A
Bottom hinge
A
Door installation
1 Reinstall the door to the appliance by fixing M6x10 hex screws (4x) into the hinges (A).
Required components/tools:
star T20 screwdriver
flat head screwdriver
hex driver
B
2 Activate the hinge spring by turning the star T20 screws to the “I” position (B).
3 Return the appliance to the upright position.
4 Reinstall all covers and trims.