Install Guide

58
DUAL INSTALLATION
Install fasteners kit
Cabinet depth alignment
gauges (4)
Top joiner
bracket kit
Central spacer
(1)
8Gx16 Mush washer
screw (2)
Tools
Cross-head screwdriver
Powered driver (optional)
1 Measure the widths from the left (A) and right (B) cabinetry
sides towards thecentre to determine the spacer location.
Refer to "Cavity dimensions' page for correct width of the
appliance.
2 Mark the attachment location of the central spacer on the
cabinetry ceiling using the depth alignment gauge (C).
z
The depth position of spacer depends on the door panel
thickness.
3 Fix a central spacer (C) to the alcove ceiling with
two 8Gx16 countersunk screws.
4 Tightenthescrews with a screwdriver or powered driver.
A
b
C
Attach central spacer to cabinetry