Install Guide - Water Filter Replacement

3
C
4
Push the entire filter back into the bracket (C).
D
5
Push the cover up and into the slots at the top of the
filter housinguntil it clicks and the base locks firmly
into place (D).
IMPORTANT!
After installation, the water filter MUST be flushed.
Referto‘Flushing the water filter’ for details.
B
3
Push the filter firmly all the way into the filter head then rotate
thefilter clockwise 90° until it locks into place (B).
– If the filter will not turn, ensure the filter is correctly aligned
(A), to allow the filter to be pushed firmly into the filter head.
– Ensure the filter is fully rotated 90° to allow the water to flow.
Installing the new filter
Note: It is not necessary to turn the water supply off when installing the water filter.
1
Remove the plastic wrapping from the new filter.
2
Align the filter correctly (A). Insert the filter into the filter head.
2 FOR FREESTANDING REFRIGERATORS
A