24in Freezer and 30in Fridge Columns Dual Install Planning File

Model no:
RS2484FLJ1 / RS2484FLJK1 + RS3084SR1 / RS3084SRK1 shown.
(Various models available to swap units to opposite sides, hinge
doors both left, both right or at the outsides as shown here).
(refer page 2 for metric measurements)
IMPORTANT!
For ease of installation, ensure cavity has consistent dimensions top to
bottom and left to right.
Clearance Dimensions in
A Overall height of cavity
84"
B Overall width of cavity
54"
C Minimum depth of cavity*
25"
D Width of supply area behind freezer
24"
e Width of supply area behind fridge
30"
f Height of supply area
9"
g Height at sides of supply area
5"
h Width from side of supply area
1/2"
i Combined width in from side of supply areas
1"
j Depth of supply area
1"
Minimum door cabinetry gap clearance
1/8"
Optional Stainless Steel Panel Dimensions in
K Height of door panel
79 7/8"
L Width of freezer door panel
23 3/4"
M Width of fridge door panel
29 3/4"
N Depth of door panels
3/4"
O Height of toekick panel
3 15/16"
P Width of toekick panel
53 7/8"
* With cavity at minimum depth, electrical and water connections must be
within the supply area shown if located behind the appliance, and must not
protrude from the back wall.
Connections may be located in an adjacent cabinet to either side of the fridge.
HANDLES: Handle Kits are sold separately. Shown with handle kit ADH3-RD84.
Other style options available.
DATA SHEET
24" Freezer + 30" Fridge - Stainless Steel Integrated Columns
DATE: 10.10.2018
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
ISO VIEW OF 54" CAVITY
(24" + 30")
SUPPLY AREA
g
e
hi
h
f
d
o
p
k
j
l
c
n
m
A
B
Stainless Steel Door Panel
RD3084R4D
Stainless Steel Door Panel
RD2484L4D
Stainless Steel Toekick
AKRS54041
RS2484FLJ1 / RS2484FLJK1
RS3084SR1 / RS3084SRK1