Installation Guide

37
@3 INSTALL CABINET TRIMS
Install the side trims
Note: Four (4) dual-lock strips are pre-installed along each side trim.
4 Slot trim in behind top hinge pocket (E), then press (F)
adhesive to cavity ensuring trim is also tight against
appliance inner face.
Note: Press firmly on the dual-lock
strip locations to ensure the side
trims are securely attached.
1 Peel off the liners from the dual-lock strips. (A)
A
3 Slide the trim behind the lower hinge (C), then the top
hinge (D). Hold the same angle when sliding the trim.
Required components/tools:

1x Alcove side trim assembly
Slide trim in behind lower hinge, then top hinge
Reveal dual-lock adhesive
Slot trim in behind hinge pocket, then press adhesive to cavity
ensuring trim is also tight against fridge inner face.
D
C
F
2 Position the trim on the throat with anangle. (B)
B B
E