Installation Guide

39
Roll the appliance carefully into the cabinetry until the anti-tip bracket overlaps the
back edge of the appliance.
z
Ensure the bracket overlaps the appliance by a minimum 7 1/16" (180mm) for a
secure hold.
z
Be careful not to run over the water hose and power cord when rolling in
the appliance.
SINGLE INSTALLATION — ALIGN APPLIANCE INTO CABINETRY
Pushing into the cabinetry
Aligning the depth gauges
NO FILL NO FILL NO FILLFILL
Tools
Cross-head
screwdriver
Ruler
Pencil
Check if the gaps between appliance and cabinetry side walls are
even on left and right sides.
On the 'Cabinet depth alignment' side of the depth gauges, mark the step on both
sides of the door based on the thickness of the door panel.
z
Example illustration show the door panel thickness 1" (25.4mm) marked on the
gauges.
Left
Right
7 1/16" (180mm)
Illustrations may differ from your purchased appliance.