18in Freezer and 24in Fridge Columns Dual Install Planning File

Model no:
RS1884FLJ1 / RS1884FLJK1 + RS2484SR1 / RS2484SRK1 shown.
(Various models available to swap units to opposite sides, hinge
doors both left, both right or at the outsides as shown here).
(refer page 1 for imperial measurements)
IMPORTANT!
For ease of installation, ensure cavity has consistent dimensions top to
bottom and left to right.
Clearance Dimensions mm
A Overall height of cavity
2134
B Overall width of cavity
1067
C Minimum depth of cavity*
635
D Width of supply area behind freezer
457
e Width of supply area behind fridge
610
f Height of supply area
229
g Height at sides of supply area
127
h Width from side of supply area
13
i Combined width in from side of supply areas
25
j Depth of supply area
25
Minimum door cabinetry gap clearance
3
Optional Stainless Steel Panel Dimensions mm
K Height of door panel
2029
L Width of freezer door panel
451
M Width of fridge door panel
603
N Depth of door panels
19
O Height of toekick panel
100
P Width of toekick panel
1063
* With cavity at minimum depth, electrical and water connections must be
within the supply area shown if located behind the appliance, and must not
protrude from the back wall.
Connections may be located in an adjacent cabinet to either side of the fridge.
HANDLES: Handle Kits are sold separately. Shown with handle kit ADH3-RD84.
Other style options available.
DATA SHEET
18" Freezer + 24" Fridge - Stainless Steel Integrated Columns
DATE: 10.10.2018
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
ISO VIEW OF 1067mm CAVITY
(457mm + 610mm)
Stainless Steel Door Panel
RD2484R4D
Stainless Steel Door Panel
RD1884L4D
c
A
B
SUPPLY AREA
f
g
e
hih
d
o
p
k
j
l
n
m
Stainless Steel Toekick
AKRS42041
RS1884FLJ1 / RS1884FLJK1
RS2484SR1 / RS2484SRK1