Installation Guide

18
!1 BEFORE INSTALLATION
IMPORTANT!
●
Your appliance is fitted with front and rear rollers designed for moving the appliance
forward and backward. Donot move the appliance sideways as this may damage the
rollers or the floor covering / surface.
●
The appliance must be installed by a qualified installer, or Fisher & Paykel trained and
supported service technician to avoid faulty electrical connection and water leaks.
●
All connections for water, electrical power and grounding must comply with local codes
and ordinances and be made by licensed personnel when required.
●
Avoid installation of the appliance/s under a ground fault circuit interrupter (GFCI).
●
Ensure the appliance is installed properly. Improper installation that results in appliance
failure is not covered under the appliance warranty.
Check installation location
1
Check the cabinetry
– Check the dimensions — height, width, depth, floor level,
finishedalcovereturns.
– Ensure that the ventilation openings in the cabinetry are clear of obstruction.
– For integrated installation, a finished return of solid material is required
across thetopand sides of the new or existing alcove.
– Refer to the ‘Appliance and cavity Dimensions’ (page 7) prior to installation
of the appliance.
2
Check the power supply
– Ensure that there is a separate power outlet for the appliance.
– Avoid sharing the power point with other appliances to prevent the
appliancefromaccidentally switching off.
– For power requirements, refer to the information on the serial plate.
Thisislocated atthe front right-hand side of the drawer when open.
– Ensure your appliance is properly grounded (earthed).
– Connect the appliance to the electrical supply (115 VAC, 60 Hz) with fitted
plug andlead.
– We recommend to use an isolating switch that is easily accessible to
theuserafterthe appliance is installed.
– Follow the National Electrical Code and all local codes and ordinances
wheninstallingthis appliance.
3
Check the water supply (for Ice and Water models only)
– Ensure that there is a separate water supply connection for the appliance.
– Your appliance must be installed by a qualified appliance installer as
incorrect plumbingcanlead to water leaks.
– Fisher & Paykel is not liable for damage (including water damage) caused
byfaultyinstallation or plumbing.