Installation Guide
Table Of Contents
- Safety and warnings
- Components
- Tools
- Appliance and cavity dimensions
- Cabinetry options
- Stainless steel door panel and toe kick dimensions
- Custom door panel and toe kick dimensions
- Custom door panel installation dimensions
- Custom door panel installation template
- Door clearance
- Electrical and plumbing
- Before installation
- Cavity preparation
- Water and power supply connection
- Top trim installation
- Side brackets installation
- Positioning into cabinetry
- Aligning inside cabinetry
- Door panel installation - stainless steel
- Door panel installation - custom
- Fixing to cabinetry
- Water filter installation
- Toe kick installation
- Door and door trims installation
- Cabinet trims installation — [A] Flexible spring clip method
- Cabinet trims installation — [B] Fixed screw method
- Final checklist
33
A
Internal box
G
Fixing bracket
install kit
Fixing bracket
(4)
M5 x 8
Countersunk
Philips Screw
M5 x 8
Countersunk
Philips Screw
M5x8 countersunk
cross-head screw (12)
Screw cover
(4)
#8 x 19
Countersunk
Twin Thread
Posi Screw
#8 x 19
Countersunk
Twin Thread
Posi Screw
#8x19 twin thread screw
(8)
Tools
Cross-head screwdriver
Powered driver (optional)
1
Open the refrigerator French doors carefully.
2
Place the fixing brackets on the top and side base brackets of the
appliance and secure mid-way with M5x8 countersunk cross-head screws
(A).
5
Fix the screw cover by tightening M5x8 countersunk
cross-head screws (D).
Attach fixing brackets
B
3
Secure the center of each fixing bracket to the side of the adjacent wall
with #8x19 twin thread screws (B).
C
4
Slide the screw cover between the fixingbracket
and the side bracket on the appliance (C).
D
FIXING TO CABINETRY